Getting started
Step 1 - Making the connections
Connect the AC mains lead only after all other connections have been made.
Preparation
Twist and pull off the vinyl tip of the speaker cords.
OR
If the speaker cords do not have vinyl tips, directly connect them to the terminals.
1 Connect the FM indoor antenna.
Adhesive tape
FM indoor antenna
2 Connect the AM loop antenna.
AM loop antenna
Tape the antenna to a wall or column, in a position with least amount of interference.
Stand the antenna up on its base. Keep loose antenna cord away from other wires and cords.
To household mains socket
3 Connect the speaker cables.
White
Red
4 Connect the AC mains lead.
Blue
Black
| Black |
Grey (+) | Red (+) |
| |
Blue |
|
FOR THE UNITED KINGDOM ONLY
READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 3 BEFORE CONNECTION.
•The included AC mains lead is for use with this unit only. Do not use it with other equipment.
Insertion of connector
Appliance inlet | Connector |
Cords with white and blue tags are for high frequency. Cords with red and black tags are for low frequency.
Incorrect connection can damage the unit.
4
Approx. 3.5 mm
Even when the connector is perfectly inserted, depending on the type of inlet used, the front part of the connector may jut out as shown in the drawing. However there is no problem using the unit.
RQT7903
