Cassette tape - Record, Before recording, Recording CDs

Cassette tape – Record

Before recording		Recording the radio

Preparation

Wind up the leader tape so that recording can begin immediately.

•Use normal position tapes.

•High position and metal position tapes can be used, but this unit will not be able to record or erase them correctly.

1	Insert the cassette to be recorded on.
2	Tune to the required station (refer page 11).
3	Press [¶/8 REC] to start recording.

1	Insert the cassette to be recorded on.
	•	Insert inside the

	OPEN	guides
	Forward side
2	Press [0 OPEN/CLOSE] to insert the CD.
	Press again to close.
3	Press [CD 3/8] and then [STOP 7, -DEMO].
4	Press [¶/8 REC] to start recording.
Recording speciﬁc CDs or tracks
1	Press [CD 3/8] and then [STOP 7, -DEMO].
2	Press [PLAY MODE] to select your desired mode
	(refer page 7).
3	Press [¶/8 REC] to start recording.
Recording programmed tracks
1	Program the tracks you want (refer page 8).
2	Press [¶/8 REC] to start recording.

To	Action
erase a recorded	1)	Insert the cassette to be recorded on.
sound	2)	Press [TAPE 3] and then [STOP 7].
	3)	Press [¶/8 REC].

stop recording	Press [STOP 7].

stop recording	1)	Press [¶/8 REC].
temporarily	2)	Press again to resume recording.

record on the other	Turn the cassette over and press
side of the tape	[¶/8 REC].

Your attention is drawn to the fact that recording pre-recorded tapes or discs or other published or broadcast material may infringe copyright laws.

Erasure prevention

The illustration shows how to remove the tabs to prevent recording. To record on the tape again, cover as shown.

RQT7903