Radio – Tune
Numeric 
buttons
Manual tuning
1 | Press [TUNER/BAND] to select “FM” or “AM”. | ||
2 | Press [PLAY MODE] to select “MANUAL”. | ||
3 | Press [4/REW/4] or [3/FF/¢] to select the | ||
| frequency of the required station. | ||
|
|
|
|
|
|
|
|
•
is displayed when a stereo FM broadcast is being received.
To tune automatically
Press [4/REW/4] or [3/FF/¢] for a moment until the frequency starts changing rapidly. The unit begins auto tuning, stopping when it fi nds a station.
•Auto tuning may not function when there is excessive interference.
•To cancel auto tuning, press [4/REW/4] or [3/FF/¢] once again.
•Sound is momentarily interrupted if you load or unload tapes while listening to an AM broadcast.
To improve FM sound quality
Press and hold [PLAY MODE] to display “MONO”.
To cancel
Press and hold [PLAY MODE] again until “MONO” disappear.
•MONO is also cancelled if the frequency is changed.
•Turn off “MONO” for normal listening.
RDS broadcasting (For Europe)
Enable you to display the name of a broadcasting station or a program type.
Press [DISPLAY] to display:
Station Name (PS) 
Program Type (PTY)
Frequency display 
• RDS displays may not be available if reception is poor.
Program type displays
NEWS | VARIED | FINANCE | COUNTRY |
AFFAIRS | POP M | CHILDREN | NATIONAL |
INFO | ROCK M | SOCIAL A | OLDIES |
SPORT | M.O.R.M | RELIGION | FOLK M |
EDUCATE | LIGHT M | PHONE IN | DOCUMENT |
DRAMA | CLASSICS | TRAVEL | TEST |
CULTURE | OTHER M | LEISURE | ALARM |
SCIENCE | WEATHER | JAZZ |
|
|
|
|
|
M.O.R.M = “Middle of the road music”
Memory preset
Up to 15 stations each can be set in the FM and AM bands.
Preparation
Press [TUNER/BAND] to select “FM” or “AM”.
Automatic presetting
Press and hold [PROGRAM] to start presetting.
Manual presetting
1
2 Press [4/REW/4] or [3/FF/¢] to tune to the required station.
3
4 Press numeric buttons to select a channel.
•The station occupying a channel is erased if another station is preset in that channel.
5 Repeat steps 2 to 4 to preset more stations.
Selecting a preset station
Press numeric buttons to select the channel.
• For channels 10 to 15 press [h10], then the two digits.
OR
1 | Press [PLAY MODE] to select “PRESET”. |
2 | Press [4/REW/4] or [3/FF/¢] to select the |
| channel. |
AM allocation setting
•This system can also receive AM broadcasts allocated in 10 kHz steps.
To change the step from 9 kHz to 10 kHz
1 Press [TUNER/BAND] to select “FM”.
2 Press and hold [TUNER/BAND].
•After a few seconds the display changes to a fl ashing display of the current minimum frequency.
3 Continue to hold down [TUNER/BAND].
•When the minimum frequency changes, release the button. To return to the original step, repeat the above steps.
•After changing the setting, previously preset frequency will be cleared.
11
RQT7903
