Setting the Dial Mode
Dial Mode sets the dial mode to tone or pulse. Most phone systems use tone dialing; the default setting is tone dialing. Set the dialing mode to match the dialing system used by your local phone service.
•If you are not sure of your dialing system, make a trial call. If the call connects, leave the setting as is; otherwise set the unit to pulse dialing.
•If your phone system requires pulse dialing and you need to send DTMF tones in certain situations during a call, you may switch over to tone dialing (refer to “Tone Dialing Switch- over” on page 25).
note 
S E
1)Press clock/menu and the volume down key to move the pointer to select Dial Mode, and then press set.
2)Press the volume up or down key to select Tone or Pulse (the initial setting is Tone).
3)Press set. You will hear a confirmation tone.
Setting Day and Time
Day & Time sets the day and time of your display.
1)Press clock/menu on the base.
2)Press set to select Time. The system announces “Time”, the current time and the guidance for the setting the time.
&KCN/QFG
6QPG 2TGUUQTUGV
Use 
delete to edit
T T I N G U P Y O U R P H O N E
3)Press the volume up or down key to select the day of the week, and then press set.
4)Enter a
5)Enter a
6)Press the volume up or down key to choose AM or PM, and then press set. You hear a confirmation tone.
the hour and minute.
w w w . u n i d e n . c o m | S E T T I N G U P Y O U R P H O N E [ 1 4 ] |