3)Enter a command within 15 seconds. You may select a command from the following chart:
Command | Function | Command | Function | ||||
|
|
|
|
|
|
|
|
|
| /1 | Repeat a Message | /5 | Stop Operation | ||
| |||||||
| |||||||
|
|
|
|
|
|
|
|
/2 | Play incoming Messages | 6 | Answering System On | ||||
|
|
|
|
|
|
|
|
|
| /3 | Skip a Message | 9 | Answering System Off | ||
| |||||||
|
|
|
|
|
|
|
|
/4 | Delete a Message | 0 | Voice Prompts | ||||
|
|
|
|
|
|
|
|
4)After the command has finished, you hear intermittent beeps indicating that the system is in the command waiting mode. You may enter another command at this time from the chart above.
5)When you are finished, press end to exit the system. The answering system automatically returns to standby.
•If the handset can’t access the base within seven seconds, you will hear beeps, and the phone will return to standby.
•The base's keypad is disabled during remote operation.
• If you receive a call, the remote operation is canceled.
•If you have new messages and old messages, only the new messages will be played. After you have reviewed your new messages, you can play your old messages by pressing the
/2 key again.
[ 5 1 ] T H E I N T E G R A T E D A N S W E R I N G D E V I C E | w w w . u n i d e n . c o m |