Furuno 1933C-BB Inserting waypoints, Inserting a waypoint from the route list, Edit route menu

Page 123

3. PLOTTER OPERATION

3.9.3Inserting waypoints

Waypoints can be inserted in a route as follows:

Inserting a waypoint from the route list

1.Press the [MENU] key to open the menu.

2.Press the C:WAYPOINTS/ROUTES soft key.

3.Press the B:ROUTES soft key.

4.Use the trackball to select a route.

5.Press the C:EDIT ROUTE soft key. The route name screen appears.

6.Press the B:LOCAL LIST soft key.

ROUTE NAME: 001

COMMENT:

 

01

 

48° 18.290'N

 

LEG

 

▲

 

 

123° 14.286'W

 

 

 

007WPT

 

 

 

 

 

 

 

 

 

90.0°

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

02

 

48° 17.341'N

 

2.86nm

 

 

 

 

123° 10.232'W

 

 

 

 

005WPT

 

 

 

 

 

322.6°

 

 

 

 

 

 

 

 

 

 

 

 

3.08nm

 

 

03

 

48° 20.261'N

 

 

 

 

 

123° 11.658'W

 

 

 

 

003WPT

 

 

 

 

 

75.2°

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

04

 

48° 19.862'N

 

4.99nm

 

 

 

 

123° 04.190'W

 

 

 

 

006WPT

 

 

 

 

152.5°

 

 

 

 

 

 

 

 

 

 

 

19.87nm

 

EDIT ROUTE

AINSERT WPT

BREMOVE WPT

CCHANGE WPT

DCOORD TYPE

E RETURN

Edit route menu

7.Use the trackball to place the cursor at the location where you want to insert a waypoint.

8.Press the A:INSERT WPT or C:CHANGE WPT soft key as appropriate. The local waypoint list appears.

▲

LOCAL LIST

001001WPT

34° 44.111'N

135° 21.134'W

002002WPT

34° 43.432'N

135° 41.456'W

003003WPT

34° 14.124'N

135° 21.567'W

004004WPT

34° 34.490'N

135° 51.387'W

Waypoint list for editing a route (local list)

offered by Busse-Yachtshop.de

3-41

Page 122 Page 124
Image 123
Page 122 Page 124
Contents Offered by Busse-Yachtshop.de 00014749700 Safety Instructions Table of Contents Iii Plotter Operation Video Sounder Operation Customizing Your Unit Vii MAINTENANCE, TroubleshootingViii ForewordModel Output Range Radar FeaturesSystem Configurations Single-unit NavNet system GD-1900C-BB Single-unit NavNet system GD-1900C-BBThree-or-more-unit NavNet XiiTwo-unit NavNet system Two-unit NavNet systemOperational Overview Operating Controls Overview of control unitControl unit Radar and plotter displays Soft keysInserting a Chart Card Chart card and card removerProcessor unit Startup sequence Turning the Unit On/OffAdjusting Hue, Panel Illumination Hue windowNight Day Twilight Display screens Selecting a DisplayDisplay modes Panel brilliance windowsSelecting a display Display screen selection windowRadar combination screen selection window To adjust plotter Switching control in combination and overlay screensSelecting image source Select source menuRadar source and sounder source windows Cursor, cursor data Trackball, CursorEntering the MOB Mark, Setting MOB as Destination MOB conceptMOB mark messages Data Boxes Showing, hiding data boxes with soft keyData boxes Temporarily erasing a data box Rearranging data boxesFunction Default Setting, Key Label Function KeysExecuting a function Simulation Display Simulation setup menuRadar NavNet processor unit-generated echoesPlotter Sounder Radar display Radar DisplayTransmitting, Stand-by TuningAdjusting the Gain Tuning windowGain sensitivity window Gain adjustment soft keyHow the A/C SEA works Adjusting the A/C SEASEA setting window Reducing Sea ClutterAdjusting the A/C Rain Rain setting windowReducing Precipitation Clutter Range Scale Range scales nm, smRange scales km Pulselength Signal process soft keysPresentation Mode Selecting a presentation modeRadar display soft keys Head-up Head-up presentation modeCourse-up presentation mode Description of presentation modesTrue motion North-up presentation modeTrue motion presentation mode North-upMeasuring range by range rings Measuring the RangeEBL/VRM soft keys How to measure range to a target with the cursorMeasuring range by cursor Measuring range by VRMHiding VRM data boxes How to measure range with the VRMErasing a VRM, VRM indication Erasing VRM data boxesMeasuring bearing by EBL How to measure bearing with the EBLMeasuring the Bearing Measuring bearing by cursorErasing EBL data boxes Hiding EBL data boxesMoving EBL data boxes Reducing Noise Interference Erasing the Heading Line, North MarkerRadar interference Rejecting Radar InterferenceZoom ZoomZooming in on radar targets Zooming in on ARP, TTM targetsShifting the picture manually Shifting the PictureManual shift Target no. selection windowAutomatic shift Setting automatic shift maximum speedAuto ship speed setting window Automatic shiftUsing the Offset EBL Predicting collision coursePredicting collision course with the offset EBL Measuring range and bearing between two targets Measuring range & bearing between two targetsTrail soft keys Echo TrailsTrail time Sample echo trailsStarting echo trails Trail gradationMultitone and monotone trails Trail color window Echo trail modeTrail mode window Trail colorTypes of echo stretch Echo StretchEffect of echo averaging Echo AveragingTarget soft keys Outputting TLL DataGuard Alarm Setting a guard alarm zoneHow to set a guard alarm zone Canceling the guard alarm When the alarm is violated…Turning on/off watchman Setting watchman stand-by intervalWatchman How watchman worksSecond-trace echoes Suppressing Second-trace EchoesWaypoint marker Waypoint Marker26 ARP, TTM Operation Usage precautions for ARPARP setup menu Activating/deactivating ARP, TTMARP target info window Automatic acquisition ARP plot symbolsAcquiring and tracking targets ARP Manual acquisitionDisplaying target number ARP, TTM Automatic acquisition areaARP target number Terminating tracking of all targets Cancel all targets windowTerminating tracking of ARP targets Terminating tracking of selected targetsSetting vector attributes ARP What is a vector?Vector reference, vector time Displaying past position ARP Past position displaysHistory interval window ARP target data 26.7 ARP, TTM target dataCPA window 26.8 CPA/TCPA alarm ARPLost target mark Lost target alarm ARPCanceling a lost target Tcpa windowInterpreting the Radar Display GeneralMinimum and maximum ranges Bearing accuracy Radar resolutionBearing resolution Range resolutionSidelobe echoes False echoesMultiple echoes Multiple echoesShadow sectors Virtual imageVirtual image Shadow sectorsSart Search and Rescue Transponder Appearance of Sart signal on the radar displayGeneral remarks on receiving Sart General procedure for detecting Sart responseRain control Appearance of racon signal on the radar displayRacon Radar Beacon SEA controlPlotter Displays Full-screen plotter displayFull-screen plotter display Nav data window Contents of nav data windowCompass display Compass displayReading the XTE cross-track error monitor Setting the range for the XTE monitorXTE range setting window Highway display Highway displayNav data displays Nav data displayNorth-up Plotter display, north-up modePlotter display, course-up mode, destination set Plotter display, auto course-up modeCourse-up Auto course-upChart Scale Charts scalesShifting the Display Chart Cards Chart card overviewChart icons and their meanings Indices and chart enlargement Sample chart Japan, showing indicesWhen a chart cannot be displayed Furuno and NavCharts charts Chart symbolsData for aids to navigation Current data display Port service iconsPlotter display, showing port service display Current or tide dataExample of caution area window MAP chartsCursor and data display Objects windowIcon data Lighthouse iconObject windows Tide information Sample lighthouse dataMap, port service display Tide windowDate window Track control menu Working with TrackDisplaying track Own ship trackTarget tracks Stopping, restarting plotting of own ship trackTarget track Changing track colorOwn ship’s track Own ship track color windowTrack plotting interval Track plotting method and interval for own ship trackTrack plotting method Interval windowTrack memory window Changing own ship track/mark distribution settingErasing track Erasing own ship track by areaErase menu Erasing all target tracks Erasing own ship track by colorErase track by color window Erasing all own ship trackMarks & lines menu Marks, LinesEntering a mark, line Changing mark attributesLines style window Selecting line typeMarks shape window Select Lines STYLE, then press the Aedit soft keyErasing marks, lines by area Erasing marks, linesErasing an individual mark Erasing an individual lineEntering a waypoint with the cursor WaypointsEntering waypoints Entering a waypoint at own ship positionWaypoint mark color selection window Waypoint mark shape selection windowEntering a waypoint by range and bearing Editing waypoint data from the waypoint list Editing waypoint dataEntering a waypoint from the waypoint list Alphanumeric and local waypoint listsPlotter display Editing a waypoint from the plotter displayErasing a waypoint from the waypoint list Erasing waypointsErasing a waypoint directly from the plotter display Erasing a waypoint from the menuChart details menu Changing waypoint mark size FURUNO, NavChartsAlphanumeric list Searching waypointsRoute menu RoutesCreating routes Entering a route with existing waypointsEntering a route with the cursor New route entry screenCreating voyage-based routes Save route menuSave route window Displays for entry of time, distance interval For manual entry of waypoints, do the followingTo stop recording waypoints and save the route Connect route window Connecting routesWaypoint list for editing a route local list Inserting waypointsInserting a waypoint from the route list Edit route menuInserting a waypoint in an intermediate location on a route Inserting a waypoint from the plotter displayRemoving a waypoint from the plotter display Removing waypoints from a routeErasing routes Removing a waypoint from the route listGo to method window NavigationNavigating to a quick point Selecting quick point entry methodSelecting a waypoint from the waypoint list Navigating to waypointsNavigating to multiple quick points Selecting a waypoint from the plotter displayNavigating to ports, port services NavCharts/C-MAP Selecting an external waypointQP window Sample filling station locations southern Italy Port services and sample port listNavigating waypoints in reverse order Following a routeSelecting the route to follow Plotter display, route selected as destinationExample of when to restart navigation Restarting navigationLog display Select speed for ETA window Setting speed for ETA calculationSwitching waypoints Automatic waypoint switching methodsCanceling route navigation Audio alarm window AlarmsAudio alarm on/off Plotter alarm menuArrival alarm How the arrival alarm worksArrival alarm window Anchor watch alarm How the anchor watch alarm worksAnchor watch alarm window XTE alarm window XTE Cross-Track Error alarmSpeed alarm How the XTE alarm worksProximity alarm Proximity alarm windowProximity mark Trip alarm window Trip alarmPlotter alarm menu, Alarm informationAlarm messages Plotter alarm messages and their meaningsMessage Meaning General setup menu, Resetting Trip DistanceUnderwater conditions and video sounder display Principle of OperationDisplay mode window Sounder DisplaysSelecting a sounder display Selecting transmission frequency Description of sounder displaysSingle-frequency display Indications on the single frequency displaySounding area and transmission frequency Dual-frequency displayDual-frequency display LF picture HF pictureMarker-zoom display plus normal sounder display Bottom-zoom displayBottom-zoom display plus normal sounder display Bottom-lock display plus normal sounder display Bottom-lock displayScope display Bottom discrimination displayBottom discrimination display Scope display display onlySelecting screen split method in combination displays Types of automatic sounder modes How to enable automatic sounder operationAutomatic Sounder Operation How the automatic sounder worksSelecting display range Selecting the manual modeAdjusting the gain Manual Sounder OperationShifting the range Gain windowShift concept Measuring Depth, Time How to measure depth and timeReducing Interference Types of interferenceNoise limiter window Reducing Low Level Noise Appearance of clutterClutter window Signal level window Erasing Weak EchoesAppearance of weak echoes Color bar 16 color when white marker function is active White MarkerWhite marker window Picture Advance Speed Advancement independent of ship’s speedPicture advance window Advancement synchronized with ship’s speed How the speed-dependent picture advance mode worksDisplay Colors Hue no. and background and echo colorsHue No Echo Color Background Color Alarm audio window Sounder alarm menuFish alarm window Bottom alarmFish alarm Bottom alarm windowFish alarm B/L window Fish alarm B/LWater temperature alarm window Water temperature alarmDepth Alarm When an alarm setting is violatedSounder alarm messages and their meanings Water Temperature GraphChanging Pulse Repetition Rate Zero line Interpreting the Sounder DisplayZero line Bottom echoSurface noise/aeration Fish school echoesSurface noise/Aeration Fish school echoesGeneral setup menu General SetupContents of general setup menu Radar Setup Radar display setupRadar display setup menu Con’t on next Contents of radar display setup menuContents of radar display setup menu con’t from previous Radar range setup Radar range setup menuModel Maximum Range Radar function key options Function key setupFunction Key Default Function Function Key Label Radar function key menuMenu Item Function Function Key Radar function keysPlotter Setup Plotter setup menu Contents of plotter setup menuNavigation options Plotter function key menu Function Default Function Function Key LabelPlotter function keys Chart Setup Chart offsetPlotter display, chart offset selected Chart details menu FURUNO, NavCharts FURUNO, NavCharts chart attributesContents of chart details menu FURUNO, NavCharts Bcntour Line soft key MAP chart attributesContour line menu FURUNO, NavCharts Chart details menu C-MAPContents of chart details menu C-MAP Adepth Info soft key Settings descriptionData box menu Data Boxes SetupHot page setup menu Hot Page SetupHOT Hot page setup menu, Split X 3 screen, sub screen selectionNavigator Setup Contents of nav setup menuNavigation data source GPS setup menu Contents of GPS setup menu GPS receiver setup Set equipped with GP-310B/320BContents of GPS setup menu con’t from previous Bgps Contents of Waas Setup menu Waas SetupLoran GRI & station pair window TD display setupTD setup menu Displaying Loran C TDsDecca chain and station pair window Displaying Decca TDsNav Data Display Setup Nav data setup screenNav data setup window Sounder system setup menu description Sounder SetupSystem setup Sounder system setup menuSM1-SM4, OFF Sounder system setup menu description con’t from previousSensor setup Sensor setup menuSensor setup menu settings Zoom range and bottom-lock ranges Sounder range setup menuDefault basic ranges Sounding range, zoom range, bottom lock rangeFunction Default Function Function Key Sounder function key menuSounder function key options Sounder function keys Memory Card Operations Formatting memory cardsSave data menu Saving data to a memory card Memory card messages Memory card messagesMessage Reason Remedy Load data menu Playing back data from a memory cardMarks & lines window Receiving Data Via Network EquipmentReceive data menu Host name windowSelect sentence menu Outputting Data Through the NetworkMaintenance program Preventive MaintenanceReplacement Replacement of the batteryReplacement of the fuse Replacement of the magnetronReplace of the synchro belt Part Type Code No Retainer ring and ball MU3721 000-144-645 Trackball MaintenanceRadar Simple TroubleshootingGeneral troubleshooting Radar troubleshootingPlotter Plotter troubleshootingSounder Sounder troubleshootingDiagnostics Memory I/O testMemory I/O Test menu GPS receiver test results Processor unit testProcessor unit test results GPS sensor test Requires GPS Receiver GP-310B/320BARP test results Network sounder test resultsTest pattern sequence Test patternKeyboard test of the control unit Screen for testing keyboard, remote controllerGPS status display GPS Status DisplayClearing Memories Memory clear menuWindows for clearing memory Error Messages Error messagesError Message Meaning Remedy Menu key Menu OverviewAP-2 AP-3 AP-4 AP-5 AP-6 AP-7 AP-8 Sounder Alarms Alarm keyRadar Alarms Plotter AlarmsGeodetic Chart List World Time Chart Icon Meaning IconsWaas What is WAAS?This page is intentionally left blank OfferedSP 1by Busse-Yachtshop.de OfferedSP 2by Busse-Yachtshop.de OfferedSP 3by Busse-Yachtshop.de OfferedSP 4by Busse-Yachtshop.de Specifications of Video Plotter GD-1900C-BB OfferedSP 6by Busse-Yachtshop.de Index Index-2 Index-3 Index-4 Index-5 Offered by Busse-Yachtshop.de Offered by Busse-Yachtshop.de Offered by Busse-Yachtshop.de
Related manuals
Manual 92 pages 42.7 Kb
Top Page Image Contents