Furuno 1943C-BB, 1953C-BB, 1933C-BB Navigating to ports, port services NavCharts/C-MAP, QP window

Page 128

3. PLOTTER OPERATION

Selecting an external waypoint

You can select a waypoint (or route) entered at an external plotter connected with NMEA cable. This function requires the RMB data sentence.

1.Press the [MENU] key, B:PLOTTER SETUP soft key to show the PLOTTER SETUP menu.

2.Use the trackball to select QP.

3.Press the C:ENTER soft key or [ENTER] knob to show the QP window.

QP°

§EXT WPT (RMB) INTERNAL

QP window

4.Select EXT WPT (RMB).

5.On a connected external plotter, set a waypoint (or route) as the destination. Selected waypoint (route) appears on the NavNet plotter screen. (on radar screen, a lollipop appears to show the waypoint.)

3.10.3Navigating to ports, port services (NavCharts™/C-MAP)

NavCharts™/C-MAPhave a port service list which shows services available at ports or harbors. (See page 3-13.) You can use the list to set your destination as follows:

1.Select “35 PTS/PORT SVC” following the procedure in “Selecting quick point entry method” on page 3-44.

2.Place the cursor on the location desired, then press the D:GOTO soft key.

Soft key titles change as in the figure below.

+	40° 45.971'N	FROM	0.26 nm	GOTO
+	13° 57.462'E	OS	180.2° M	GOTO

16.0nm	A	QUICK
		ROUTE
	B	NEAR
		SRVC
PUNTA CORNACCHIA

ACCO AMENO

ISCHIA

PORTO

C PORT*

CASAMICCIOLA

I. ISCHIA

E CANCEL

GOTO

*NavChartsTM only

Plotter display

3.Press the C:PORT (NavCharts™ only) or B:NEAR SRVC soft key depending on objective. PORT shows a list of ports in your area. NEAR SRVC displays the port service list.

3-46	offered by Busse-Yachtshop.de

Image 128

Contents Offered by Busse-Yachtshop.de 00014749700 Safety Instructions Table of Contents Iii Plotter Operation Video Sounder Operation Customizing Your Unit MAINTENANCE, Troubleshooting ViiForeword ViiiFeatures Model Output Range RadarSystem Configurations Single-unit NavNet system GD-1900C-BB Single-unit NavNet system GD-1900C-BBXii Two-unit NavNet systemTwo-unit NavNet system Three-or-more-unit NavNetOperational Overview Control unit Operating ControlsOverview of control unit Soft keys Radar and plotter displaysProcessor unit Inserting a Chart CardChart card and card remover Turning the Unit On/Off Startup sequenceNight Day Twilight Adjusting Hue, Panel IlluminationHue window Selecting a Display Display modesPanel brilliance windows Display screensRadar combination screen selection window Selecting a displayDisplay screen selection window Switching control in combination and overlay screens To adjust plotterRadar source and sounder source windows Selecting image sourceSelect source menu Trackball, Cursor Cursor, cursor dataMOB mark messages Entering the MOB Mark, Setting MOB as DestinationMOB concept Data boxes Data BoxesShowing, hiding data boxes with soft key Rearranging data boxes Temporarily erasing a data boxExecuting a function Function Default Setting, Key LabelFunction Keys Simulation setup menu Simulation DisplayPlotter RadarNavNet processor unit-generated echoes Sounder Radar Display Radar displayTuning Adjusting the GainTuning window Transmitting, Stand-byGain adjustment soft key Gain sensitivity windowAdjusting the A/C SEA SEA setting windowReducing Sea Clutter How the A/C SEA worksReducing Precipitation Clutter Adjusting the A/C RainRain setting window Range scales km Range ScaleRange scales nm, sm Signal process soft keys PulselengthRadar display soft keys Presentation ModeSelecting a presentation mode Head-up presentation mode Course-up presentation modeDescription of presentation modes Head-upNorth-up presentation mode True motion presentation modeNorth-up True motionMeasuring the Range Measuring range by range ringsHow to measure range to a target with the cursor Measuring range by cursorMeasuring range by VRM EBL/VRM soft keysHow to measure range with the VRM Erasing a VRM, VRM indicationErasing VRM data boxes Hiding VRM data boxesHow to measure bearing with the EBL Measuring the BearingMeasuring bearing by cursor Measuring bearing by EBLMoving EBL data boxes Erasing EBL data boxesHiding EBL data boxes Erasing the Heading Line, North Marker Reducing Noise InterferenceRejecting Radar Interference Radar interferenceZoom Zooming in on radar targetsZooming in on ARP, TTM targets ZoomShifting the Picture Manual shiftTarget no. selection window Shifting the picture manuallySetting automatic shift maximum speed Auto ship speed setting windowAutomatic shift Automatic shiftPredicting collision course with the offset EBL Using the Offset EBLPredicting collision course Measuring range & bearing between two targets Measuring range and bearing between two targetsEcho Trails Trail timeSample echo trails Trail soft keysMultitone and monotone trails Starting echo trailsTrail gradation Echo trail mode Trail mode windowTrail color Trail color windowEcho Stretch Types of echo stretchEcho Averaging Effect of echo averagingOutputting TLL Data Target soft keysHow to set a guard alarm zone Guard AlarmSetting a guard alarm zone When the alarm is violated… Canceling the guard alarmSetting watchman stand-by interval WatchmanHow watchman works Turning on/off watchmanSuppressing Second-trace Echoes Second-trace echoesWaypoint Marker Waypoint markerUsage precautions for ARP 26 ARP, TTM OperationARP target info window ARP setup menuActivating/deactivating ARP, TTM ARP plot symbols Acquiring and tracking targets ARPManual acquisition Automatic acquisitionARP target number Displaying target number ARP, TTMAutomatic acquisition area Cancel all targets window Terminating tracking of ARP targetsTerminating tracking of selected targets Terminating tracking of all targetsVector reference, vector time Setting vector attributes ARPWhat is a vector? History interval window Displaying past position ARPPast position displays 26.7 ARP, TTM target data ARP target data26.8 CPA/TCPA alarm ARP CPA windowLost target alarm ARP Canceling a lost targetTcpa window Lost target markMinimum and maximum ranges Interpreting the Radar DisplayGeneral Radar resolution Bearing resolutionRange resolution Bearing accuracyFalse echoes Multiple echoesMultiple echoes Sidelobe echoesVirtual image Virtual imageShadow sectors Shadow sectorsAppearance of Sart signal on the radar display Sart Search and Rescue TransponderGeneral procedure for detecting Sart response General remarks on receiving SartAppearance of racon signal on the radar display Racon Radar BeaconSEA control Rain controlFull-screen plotter display Plotter DisplaysFull-screen plotter display Contents of nav data window Nav data windowCompass display Compass displayXTE range setting window Reading the XTE cross-track error monitorSetting the range for the XTE monitor Highway display Highway displayNav data display Nav data displaysPlotter display, north-up mode North-upPlotter display, auto course-up mode Course-upAuto course-up Plotter display, course-up mode, destination setShifting the Display Chart ScaleCharts scales Chart icons and their meanings Chart CardsChart card overview When a chart cannot be displayed Indices and chart enlargementSample chart Japan, showing indices Data for aids to navigation Furuno and NavCharts chartsChart symbols Port service icons Plotter display, showing port service displayCurrent or tide data Current data displayMAP charts Cursor and data displayObjects window Example of caution area windowObject windows Icon dataLighthouse icon Sample lighthouse data Tide informationDate window Map, port service displayTide window Working with Track Displaying trackOwn ship track Track control menuStopping, restarting plotting of own ship track Target tracksChanging track color Own ship’s trackOwn ship track color window Target trackTrack plotting method and interval for own ship track Track plotting methodInterval window Track plotting intervalChanging own ship track/mark distribution setting Track memory windowErase menu Erasing trackErasing own ship track by area Erasing own ship track by color Erase track by color windowErasing all own ship track Erasing all target tracksMarks, Lines Entering a mark, lineChanging mark attributes Marks & lines menuSelecting line type Marks shape windowSelect Lines STYLE, then press the Aedit soft key Lines style windowErasing marks, lines Erasing an individual markErasing an individual line Erasing marks, lines by areaWaypoints Entering waypointsEntering a waypoint at own ship position Entering a waypoint with the cursorWaypoint mark shape selection window Waypoint mark color selection windowEntering a waypoint by range and bearing Editing waypoint data Entering a waypoint from the waypoint listAlphanumeric and local waypoint lists Editing waypoint data from the waypoint listEditing a waypoint from the plotter display Plotter displayErasing waypoints Erasing a waypoint directly from the plotter displayErasing a waypoint from the menu Erasing a waypoint from the waypoint listChanging waypoint mark size FURUNO, NavCharts Chart details menuSearching waypoints Alphanumeric listRoutes Creating routesEntering a route with existing waypoints Route menuNew route entry screen Entering a route with the cursorSave route window Creating voyage-based routesSave route menu To stop recording waypoints and save the route Displays for entry of time, distance intervalFor manual entry of waypoints, do the following Connecting routes Connect route windowInserting waypoints Inserting a waypoint from the route listEdit route menu Waypoint list for editing a route local listInserting a waypoint from the plotter display Inserting a waypoint in an intermediate location on a routeRemoving waypoints from a route Erasing routesRemoving a waypoint from the route list Removing a waypoint from the plotter displayNavigation Navigating to a quick pointSelecting quick point entry method Go to method windowNavigating to waypoints Navigating to multiple quick pointsSelecting a waypoint from the plotter display Selecting a waypoint from the waypoint listQP window Navigating to ports, port services NavCharts/C-MAPSelecting an external waypoint Port services and sample port list Sample filling station locations southern ItalyFollowing a route Selecting the route to followPlotter display, route selected as destination Navigating waypoints in reverse orderLog display Example of when to restart navigationRestarting navigation Setting speed for ETA calculation Switching waypointsAutomatic waypoint switching methods Select speed for ETA windowCanceling route navigation Alarms Audio alarm on/offPlotter alarm menu Audio alarm windowArrival alarm window Arrival alarmHow the arrival alarm works Anchor watch alarm window Anchor watch alarmHow the anchor watch alarm works XTE Cross-Track Error alarm Speed alarmHow the XTE alarm works XTE alarm windowProximity mark Proximity alarmProximity alarm window Trip alarm Trip alarm windowAlarm information Plotter alarm menu,Message Meaning Alarm messagesPlotter alarm messages and their meanings Resetting Trip Distance General setup menu,Principle of Operation Underwater conditions and video sounder displaySelecting a sounder display Display mode windowSounder Displays Description of sounder displays Single-frequency displayIndications on the single frequency display Selecting transmission frequencyDual-frequency display Dual-frequency display LF pictureHF picture Sounding area and transmission frequencyBottom-zoom display plus normal sounder display Marker-zoom display plus normal sounder displayBottom-zoom display Bottom-lock display Bottom-lock display plus normal sounder displayBottom discrimination display Bottom discrimination displayScope display display only Scope displaySelecting screen split method in combination displays How to enable automatic sounder operation Automatic Sounder OperationHow the automatic sounder works Types of automatic sounder modesSelecting the manual mode Adjusting the gainManual Sounder Operation Selecting display rangeShift concept Shifting the rangeGain window How to measure depth and time Measuring Depth, TimeNoise limiter window Reducing InterferenceTypes of interference Clutter window Reducing Low Level NoiseAppearance of clutter Appearance of weak echoes Signal level windowErasing Weak Echoes White marker window Color bar 16 color when white marker function is activeWhite Marker Picture advance window Picture Advance SpeedAdvancement independent of ship’s speed How the speed-dependent picture advance mode works Advancement synchronized with ship’s speedHue No Echo Color Background Color Display ColorsHue no. and background and echo colors Sounder alarm menu Alarm audio windowBottom alarm Fish alarmBottom alarm window Fish alarm windowFish alarm B/L Fish alarm B/L windowWater temperature alarm Water temperature alarm windowWhen an alarm setting is violated Depth AlarmWater Temperature Graph Sounder alarm messages and their meaningsChanging Pulse Repetition Rate Interpreting the Sounder Display Zero lineBottom echo Zero lineFish school echoes Surface noise/AerationFish school echoes Surface noise/aerationGeneral Setup General setup menuContents of general setup menu Radar display setup menu Radar SetupRadar display setup Contents of radar display setup menu Con’t on nextContents of radar display setup menu con’t from previous Model Maximum Range Radar range setupRadar range setup menu Function key setup Function Key Default Function Function Key LabelRadar function key menu Radar function key optionsRadar function keys Menu Item Function Function KeyNavigation options Plotter SetupPlotter setup menu Contents of plotter setup menu Function Default Function Function Key Label Plotter function key menuPlotter function keys Plotter display, chart offset selected Chart SetupChart offset FURUNO, NavCharts chart attributes Chart details menu FURUNO, NavChartsContents of chart details menu FURUNO, NavCharts MAP chart attributes Contour line menu FURUNO, NavChartsChart details menu C-MAP Bcntour Line soft keyContents of chart details menu C-MAP Settings description Adepth Info soft keyData Boxes Setup Data box menuHot Page Setup Hot page setup menuHot page setup menu, Split X 3 screen, sub screen selection HOTNavigation data source Navigator SetupContents of nav setup menu GPS receiver setup Set equipped with GP-310B/320B GPS setup menu Contents of GPS setup menuContents of GPS setup menu con’t from previous Bgps Waas Setup Contents of Waas Setup menuTD display setup TD setup menuDisplaying Loran C TDs Loran GRI & station pair windowDisplaying Decca TDs Decca chain and station pair windowNav data setup window Nav Data Display SetupNav data setup screen Sounder Setup System setupSounder system setup menu Sounder system setup menu descriptionSounder system setup menu description con’t from previous SM1-SM4, OFFSensor setup menu settings Sensor setupSensor setup menu Sounder range setup menu Default basic rangesSounding range, zoom range, bottom lock range Zoom range and bottom-lock rangesSounder function key options Function Default Function Function KeySounder function key menu Sounder function keys Save data menu Memory Card OperationsFormatting memory cards Saving data to a memory card Message Reason Remedy Memory card messagesMemory card messages Playing back data from a memory card Load data menuReceiving Data Via Network Equipment Receive data menuHost name window Marks & lines windowOutputting Data Through the Network Select sentence menuPreventive Maintenance ReplacementReplacement of the battery Maintenance programReplace of the synchro belt Replacement of the fuseReplacement of the magnetron Trackball Maintenance Part Type Code No Retainer ring and ball MU3721 000-144-645Simple Troubleshooting General troubleshootingRadar troubleshooting RadarPlotter troubleshooting PlotterSounder troubleshooting SounderMemory I/O Test menu DiagnosticsMemory I/O test Processor unit test Processor unit test resultsGPS sensor test Requires GPS Receiver GP-310B/320B GPS receiver test resultsNetwork sounder test results ARP test resultsTest pattern Test pattern sequenceScreen for testing keyboard, remote controller Keyboard test of the control unitGPS Status Display GPS status displayWindows for clearing memory Clearing MemoriesMemory clear menu Error Message Meaning Remedy Error MessagesError messages Menu Overview Menu keyAP-2 AP-3 AP-4 AP-5 AP-6 AP-7 AP-8 Alarm key Radar AlarmsPlotter Alarms Sounder AlarmsGeodetic Chart List World Time Chart Icons Icon MeaningWhat is WAAS? WaasThis page is intentionally left blank OfferedSP 1by Busse-Yachtshop.de OfferedSP 2by Busse-Yachtshop.de OfferedSP 3by Busse-Yachtshop.de OfferedSP 4by Busse-Yachtshop.de Specifications of Video Plotter GD-1900C-BB OfferedSP 6by Busse-Yachtshop.de Index Index-2 Index-3 Index-4 Index-5 Offered by Busse-Yachtshop.de Offered by Busse-Yachtshop.de Offered by Busse-Yachtshop.de

Related manuals

Manual 92 pages 42.7 Kb