Furuno 1823C-BB, 1953C-BB manual How the anchor watch alarm works, Anchor watch alarm window

Page 136

3. PLOTTER OPERATION

3.11.3Anchor watch alarm

The anchor watch alarm informs you that your boat is moving when it should be at rest. When the anchor watch is active, a red dashed circle with an “X” at its center marks the anchor watch area.

Alarm setting

Your ship's position where
you start the anchor watch		: Alarm
alarm.		area
alarm.		area

How the anchor watch alarm works

1.Press the [ALARM] key to open the alarm menu.

2.Use the trackball to select ANCHOR WATCH ALARM.

3.Press the A:EDIT soft key to open the anchor alarm window.

ANCHOR WATCH ALARM

▲°

§ON 0.010nm

OFF

▼

Anchor watch alarm window

4.Use the trackball to select ON.

5.Use the trackball and the alphanumeric keys to enter alarm setting: Operate the trackball to select digit; use the alphanumeric keys to enter value. The available anchor watch setting is 0.001 to 9.999 miles.

6.Press the C:ENTER soft key or push the [ENTER] knob to register setting.

7.Press the [ALARM] key to finish.

Note: If the arrival alarm range is changed, turn off the anchor watch alarm and then turn it on again to give priority to the anchor watch alarm.

3-54	offered by Busse-Yachtshop.de

Image 136

Contents Offered by Busse-Yachtshop.de 00014749700 Safety Instructions Table of Contents Iii Plotter Operation Video Sounder Operation Customizing Your Unit MAINTENANCE, Troubleshooting ViiForeword ViiiFeatures Model Output Range RadarSystem Configurations Single-unit NavNet system GD-1900C-BB Single-unit NavNet system GD-1900C-BBXii Two-unit NavNet systemTwo-unit NavNet system Three-or-more-unit NavNetOperational Overview Overview of control unit Operating ControlsControl unit Soft keys Radar and plotter displaysChart card and card remover Inserting a Chart CardProcessor unit Turning the Unit On/Off Startup sequenceHue window Adjusting Hue, Panel IlluminationNight Day Twilight Selecting a Display Display modesPanel brilliance windows Display screensDisplay screen selection window Selecting a displayRadar combination screen selection window Switching control in combination and overlay screens To adjust plotterSelect source menu Selecting image sourceRadar source and sounder source windows Trackball, Cursor Cursor, cursor dataMOB concept Entering the MOB Mark, Setting MOB as DestinationMOB mark messages Showing, hiding data boxes with soft key Data BoxesData boxes Rearranging data boxes Temporarily erasing a data boxFunction Keys Function Default Setting, Key LabelExecuting a function Simulation setup menu Simulation DisplayNavNet processor unit-generated echoes RadarPlotter Sounder Radar Display Radar displayTuning Adjusting the GainTuning window Transmitting, Stand-byGain adjustment soft key Gain sensitivity windowAdjusting the A/C SEA SEA setting windowReducing Sea Clutter How the A/C SEA worksRain setting window Adjusting the A/C RainReducing Precipitation Clutter Range scales nm, sm Range ScaleRange scales km Signal process soft keys PulselengthSelecting a presentation mode Presentation ModeRadar display soft keys Head-up presentation mode Course-up presentation modeDescription of presentation modes Head-upNorth-up presentation mode True motion presentation modeNorth-up True motionMeasuring the Range Measuring range by range ringsHow to measure range to a target with the cursor Measuring range by cursorMeasuring range by VRM EBL/VRM soft keysHow to measure range with the VRM Erasing a VRM, VRM indicationErasing VRM data boxes Hiding VRM data boxesHow to measure bearing with the EBL Measuring the BearingMeasuring bearing by cursor Measuring bearing by EBLHiding EBL data boxes Erasing EBL data boxesMoving EBL data boxes Erasing the Heading Line, North Marker Reducing Noise InterferenceRejecting Radar Interference Radar interferenceZoom Zooming in on radar targetsZooming in on ARP, TTM targets ZoomShifting the Picture Manual shiftTarget no. selection window Shifting the picture manuallySetting automatic shift maximum speed Auto ship speed setting windowAutomatic shift Automatic shiftPredicting collision course Using the Offset EBLPredicting collision course with the offset EBL Measuring range & bearing between two targets Measuring range and bearing between two targetsEcho Trails Trail timeSample echo trails Trail soft keysTrail gradation Starting echo trailsMultitone and monotone trails Echo trail mode Trail mode windowTrail color Trail color windowEcho Stretch Types of echo stretchEcho Averaging Effect of echo averagingOutputting TLL Data Target soft keysSetting a guard alarm zone Guard AlarmHow to set a guard alarm zone When the alarm is violated… Canceling the guard alarmSetting watchman stand-by interval WatchmanHow watchman works Turning on/off watchmanSuppressing Second-trace Echoes Second-trace echoesWaypoint Marker Waypoint markerUsage precautions for ARP 26 ARP, TTM OperationActivating/deactivating ARP, TTM ARP setup menuARP target info window ARP plot symbols Acquiring and tracking targets ARPManual acquisition Automatic acquisitionAutomatic acquisition area Displaying target number ARP, TTMARP target number Cancel all targets window Terminating tracking of ARP targetsTerminating tracking of selected targets Terminating tracking of all targetsWhat is a vector? Setting vector attributes ARPVector reference, vector time Past position displays Displaying past position ARPHistory interval window 26.7 ARP, TTM target data ARP target data26.8 CPA/TCPA alarm ARP CPA windowLost target alarm ARP Canceling a lost targetTcpa window Lost target markGeneral Interpreting the Radar DisplayMinimum and maximum ranges Radar resolution Bearing resolutionRange resolution Bearing accuracyFalse echoes Multiple echoesMultiple echoes Sidelobe echoesVirtual image Virtual imageShadow sectors Shadow sectorsAppearance of Sart signal on the radar display Sart Search and Rescue TransponderGeneral procedure for detecting Sart response General remarks on receiving SartAppearance of racon signal on the radar display Racon Radar BeaconSEA control Rain controlFull-screen plotter display Plotter DisplaysFull-screen plotter display Contents of nav data window Nav data windowCompass display Compass displaySetting the range for the XTE monitor Reading the XTE cross-track error monitorXTE range setting window Highway display Highway displayNav data display Nav data displaysPlotter display, north-up mode North-upPlotter display, auto course-up mode Course-upAuto course-up Plotter display, course-up mode, destination setCharts scales Chart ScaleShifting the Display Chart card overview Chart CardsChart icons and their meanings Sample chart Japan, showing indices Indices and chart enlargementWhen a chart cannot be displayed Chart symbols Furuno and NavCharts chartsData for aids to navigation Port service icons Plotter display, showing port service displayCurrent or tide data Current data displayMAP charts Cursor and data displayObjects window Example of caution area windowLighthouse icon Icon dataObject windows Sample lighthouse data Tide informationTide window Map, port service displayDate window Working with Track Displaying trackOwn ship track Track control menuStopping, restarting plotting of own ship track Target tracksChanging track color Own ship’s trackOwn ship track color window Target trackTrack plotting method and interval for own ship track Track plotting methodInterval window Track plotting intervalChanging own ship track/mark distribution setting Track memory windowErasing own ship track by area Erasing trackErase menu Erasing own ship track by color Erase track by color windowErasing all own ship track Erasing all target tracksMarks, Lines Entering a mark, lineChanging mark attributes Marks & lines menuSelecting line type Marks shape windowSelect Lines STYLE, then press the Aedit soft key Lines style windowErasing marks, lines Erasing an individual markErasing an individual line Erasing marks, lines by areaWaypoints Entering waypointsEntering a waypoint at own ship position Entering a waypoint with the cursorWaypoint mark shape selection window Waypoint mark color selection windowEntering a waypoint by range and bearing Editing waypoint data Entering a waypoint from the waypoint listAlphanumeric and local waypoint lists Editing waypoint data from the waypoint listEditing a waypoint from the plotter display Plotter displayErasing waypoints Erasing a waypoint directly from the plotter displayErasing a waypoint from the menu Erasing a waypoint from the waypoint listChanging waypoint mark size FURUNO, NavCharts Chart details menuSearching waypoints Alphanumeric listRoutes Creating routesEntering a route with existing waypoints Route menuNew route entry screen Entering a route with the cursorSave route menu Creating voyage-based routesSave route window For manual entry of waypoints, do the following Displays for entry of time, distance intervalTo stop recording waypoints and save the route Connecting routes Connect route windowInserting waypoints Inserting a waypoint from the route listEdit route menu Waypoint list for editing a route local listInserting a waypoint from the plotter display Inserting a waypoint in an intermediate location on a routeRemoving waypoints from a route Erasing routesRemoving a waypoint from the route list Removing a waypoint from the plotter displayNavigation Navigating to a quick pointSelecting quick point entry method Go to method windowNavigating to waypoints Navigating to multiple quick pointsSelecting a waypoint from the plotter display Selecting a waypoint from the waypoint listSelecting an external waypoint Navigating to ports, port services NavCharts/C-MAPQP window Port services and sample port list Sample filling station locations southern ItalyFollowing a route Selecting the route to followPlotter display, route selected as destination Navigating waypoints in reverse orderRestarting navigation Example of when to restart navigationLog display Setting speed for ETA calculation Switching waypointsAutomatic waypoint switching methods Select speed for ETA windowCanceling route navigation Alarms Audio alarm on/offPlotter alarm menu Audio alarm windowHow the arrival alarm works Arrival alarmArrival alarm window How the anchor watch alarm works Anchor watch alarmAnchor watch alarm window XTE Cross-Track Error alarm Speed alarmHow the XTE alarm works XTE alarm windowProximity alarm window Proximity alarmProximity mark Trip alarm Trip alarm windowAlarm information Plotter alarm menu,Plotter alarm messages and their meanings Alarm messagesMessage Meaning Resetting Trip Distance General setup menu,Principle of Operation Underwater conditions and video sounder displaySounder Displays Display mode windowSelecting a sounder display Description of sounder displays Single-frequency displayIndications on the single frequency display Selecting transmission frequencyDual-frequency display Dual-frequency display LF pictureHF picture Sounding area and transmission frequencyBottom-zoom display Marker-zoom display plus normal sounder displayBottom-zoom display plus normal sounder display Bottom-lock display Bottom-lock display plus normal sounder displayBottom discrimination display Bottom discrimination displayScope display display only Scope displaySelecting screen split method in combination displays How to enable automatic sounder operation Automatic Sounder OperationHow the automatic sounder works Types of automatic sounder modesSelecting the manual mode Adjusting the gainManual Sounder Operation Selecting display rangeGain window Shifting the rangeShift concept How to measure depth and time Measuring Depth, TimeTypes of interference Reducing InterferenceNoise limiter window Appearance of clutter Reducing Low Level NoiseClutter window Erasing Weak Echoes Signal level windowAppearance of weak echoes White Marker Color bar 16 color when white marker function is activeWhite marker window Advancement independent of ship’s speed Picture Advance SpeedPicture advance window How the speed-dependent picture advance mode works Advancement synchronized with ship’s speedHue no. and background and echo colors Display ColorsHue No Echo Color Background Color Sounder alarm menu Alarm audio windowBottom alarm Fish alarmBottom alarm window Fish alarm windowFish alarm B/L Fish alarm B/L windowWater temperature alarm Water temperature alarm windowWhen an alarm setting is violated Depth AlarmWater Temperature Graph Sounder alarm messages and their meaningsChanging Pulse Repetition Rate Interpreting the Sounder Display Zero lineBottom echo Zero lineFish school echoes Surface noise/AerationFish school echoes Surface noise/aerationGeneral Setup General setup menuContents of general setup menu Radar display setup Radar SetupRadar display setup menu Contents of radar display setup menu Con’t on nextContents of radar display setup menu con’t from previous Radar range setup menu Radar range setupModel Maximum Range Function key setup Function Key Default Function Function Key LabelRadar function key menu Radar function key optionsRadar function keys Menu Item Function Function KeyPlotter setup menu Contents of plotter setup menu Plotter SetupNavigation options Function Default Function Function Key Label Plotter function key menuPlotter function keys Chart offset Chart SetupPlotter display, chart offset selected FURUNO, NavCharts chart attributes Chart details menu FURUNO, NavChartsContents of chart details menu FURUNO, NavCharts MAP chart attributes Contour line menu FURUNO, NavChartsChart details menu C-MAP Bcntour Line soft keyContents of chart details menu C-MAP Settings description Adepth Info soft keyData Boxes Setup Data box menuHot Page Setup Hot page setup menuHot page setup menu, Split X 3 screen, sub screen selection HOTContents of nav setup menu Navigator SetupNavigation data source GPS receiver setup Set equipped with GP-310B/320B GPS setup menu Contents of GPS setup menuContents of GPS setup menu con’t from previous Bgps Waas Setup Contents of Waas Setup menuTD display setup TD setup menuDisplaying Loran C TDs Loran GRI & station pair windowDisplaying Decca TDs Decca chain and station pair windowNav data setup screen Nav Data Display SetupNav data setup window Sounder Setup System setupSounder system setup menu Sounder system setup menu descriptionSounder system setup menu description con’t from previous SM1-SM4, OFFSensor setup menu Sensor setupSensor setup menu settings Sounder range setup menu Default basic rangesSounding range, zoom range, bottom lock range Zoom range and bottom-lock rangesSounder function key menu Function Default Function Function KeySounder function key options Sounder function keys Formatting memory cards Memory Card OperationsSave data menu Saving data to a memory card Memory card messages Memory card messagesMessage Reason Remedy Playing back data from a memory card Load data menuReceiving Data Via Network Equipment Receive data menuHost name window Marks & lines windowOutputting Data Through the Network Select sentence menuPreventive Maintenance ReplacementReplacement of the battery Maintenance programReplacement of the magnetron Replacement of the fuseReplace of the synchro belt Trackball Maintenance Part Type Code No Retainer ring and ball MU3721 000-144-645Simple Troubleshooting General troubleshootingRadar troubleshooting RadarPlotter troubleshooting PlotterSounder troubleshooting SounderMemory I/O test DiagnosticsMemory I/O Test menu Processor unit test Processor unit test resultsGPS sensor test Requires GPS Receiver GP-310B/320B GPS receiver test resultsNetwork sounder test results ARP test resultsTest pattern Test pattern sequenceScreen for testing keyboard, remote controller Keyboard test of the control unitGPS Status Display GPS status displayMemory clear menu Clearing MemoriesWindows for clearing memory Error messages Error MessagesError Message Meaning Remedy Menu Overview Menu keyAP-2 AP-3 AP-4 AP-5 AP-6 AP-7 AP-8 Alarm key Radar AlarmsPlotter Alarms Sounder AlarmsGeodetic Chart List World Time Chart Icons Icon MeaningWhat is WAAS? WaasThis page is intentionally left blank OfferedSP 1by Busse-Yachtshop.de OfferedSP 2by Busse-Yachtshop.de OfferedSP 3by Busse-Yachtshop.de OfferedSP 4by Busse-Yachtshop.de Specifications of Video Plotter GD-1900C-BB OfferedSP 6by Busse-Yachtshop.de Index Index-2 Index-3 Index-4 Index-5 Offered by Busse-Yachtshop.de Offered by Busse-Yachtshop.de Offered by Busse-Yachtshop.de

Related manuals

Manual 92 pages 42.7 Kb