Furuno FURUNO MARINE RADAR, 1953C-BB, 1943C-BB, 1933C-BB Proximity mark, Proximity alarm window

Page 138

3.PLOTTER OPERATION

4.Use the trackball to select WITHIN, UNDER/OVER, or OFF as appropriate

5.For WITHIN and UNDER/OVER use the trackball and the alphanumeric keys to enter alarm range: Operate the trackball to select digit; use the alphanumeric keys to enter value.

6.Press the C:ENTER soft key or push the [ENTER] knob to register setting.

7.Press the [ALARM] key to finish.

3.11.6Proximity alarm

The proximity alarm alerts you when own ship nears a waypoint, which is marked with the proximity mark, by the proximity alarm radius set for that waypoint on the waypoint list. When own ship is within a waypoint’s proximity alarm radius, the alarm sounds. The proximity mark remains on the screen until the waypoint is erased.

Radius in proportion to proximity alarm radius, which is set on waypoint list

001WPT

Proximity mark

1.Press the [ALARM] key to open the alarm menu.

2.Use the trackball to select PROXIMITY ALARM.

3.Press the A:EDIT soft key to show the proximity alarm window.

PROXIMITY ALARM

°▲

§ON

OFF

▼

Proximity alarm window

4.Use the trackball to select ON or OFF as appropriate, then press the C:ENTER soft key.

5.Press the [ALARM] key to finish.

3-56	offered by Busse-Yachtshop.de

Image 138

Contents Offered by Busse-Yachtshop.de 00014749700 Safety Instructions Table of Contents Iii Plotter Operation Video Sounder Operation Customizing Your Unit MAINTENANCE, Troubleshooting ViiForeword ViiiFeatures Model Output Range RadarSystem Configurations Single-unit NavNet system GD-1900C-BB Single-unit NavNet system GD-1900C-BBTwo-unit NavNet system XiiTwo-unit NavNet system Three-or-more-unit NavNetOperational Overview Operating Controls Overview of control unitControl unit Soft keys Radar and plotter displaysInserting a Chart Card Chart card and card removerProcessor unit Turning the Unit On/Off Startup sequenceAdjusting Hue, Panel Illumination Hue windowNight Day Twilight Panel brilliance windows Selecting a DisplayDisplay modes Display screensSelecting a display Display screen selection windowRadar combination screen selection window Switching control in combination and overlay screens To adjust plotterSelecting image source Select source menuRadar source and sounder source windows Trackball, Cursor Cursor, cursor dataEntering the MOB Mark, Setting MOB as Destination MOB conceptMOB mark messages Data Boxes Showing, hiding data boxes with soft keyData boxes Rearranging data boxes Temporarily erasing a data boxFunction Default Setting, Key Label Function KeysExecuting a function Simulation setup menu Simulation DisplayRadar NavNet processor unit-generated echoesPlotter Sounder Radar Display Radar displayTuning window TuningAdjusting the Gain Transmitting, Stand-byGain adjustment soft key Gain sensitivity windowReducing Sea Clutter Adjusting the A/C SEASEA setting window How the A/C SEA worksAdjusting the A/C Rain Rain setting windowReducing Precipitation Clutter Range Scale Range scales nm, smRange scales km Signal process soft keys PulselengthPresentation Mode Selecting a presentation modeRadar display soft keys Description of presentation modes Head-up presentation modeCourse-up presentation mode Head-upNorth-up North-up presentation modeTrue motion presentation mode True motionMeasuring the Range Measuring range by range ringsMeasuring range by VRM How to measure range to a target with the cursorMeasuring range by cursor EBL/VRM soft keysErasing VRM data boxes How to measure range with the VRMErasing a VRM, VRM indication Hiding VRM data boxesMeasuring bearing by cursor How to measure bearing with the EBLMeasuring the Bearing Measuring bearing by EBLErasing EBL data boxes Hiding EBL data boxesMoving EBL data boxes Erasing the Heading Line, North Marker Reducing Noise InterferenceRejecting Radar Interference Radar interferenceZooming in on ARP, TTM targets ZoomZooming in on radar targets ZoomTarget no. selection window Shifting the PictureManual shift Shifting the picture manuallyAutomatic shift Setting automatic shift maximum speedAuto ship speed setting window Automatic shiftUsing the Offset EBL Predicting collision coursePredicting collision course with the offset EBL Measuring range & bearing between two targets Measuring range and bearing between two targetsSample echo trails Echo TrailsTrail time Trail soft keysStarting echo trails Trail gradationMultitone and monotone trails Trail color Echo trail modeTrail mode window Trail color windowEcho Stretch Types of echo stretchEcho Averaging Effect of echo averagingOutputting TLL Data Target soft keysGuard Alarm Setting a guard alarm zoneHow to set a guard alarm zone When the alarm is violated… Canceling the guard alarmHow watchman works Setting watchman stand-by intervalWatchman Turning on/off watchmanSuppressing Second-trace Echoes Second-trace echoesWaypoint Marker Waypoint markerUsage precautions for ARP 26 ARP, TTM OperationARP setup menu Activating/deactivating ARP, TTMARP target info window Manual acquisition ARP plot symbolsAcquiring and tracking targets ARP Automatic acquisitionDisplaying target number ARP, TTM Automatic acquisition areaARP target number Terminating tracking of selected targets Cancel all targets windowTerminating tracking of ARP targets Terminating tracking of all targetsSetting vector attributes ARP What is a vector?Vector reference, vector time Displaying past position ARP Past position displaysHistory interval window 26.7 ARP, TTM target data ARP target data26.8 CPA/TCPA alarm ARP CPA windowTcpa window Lost target alarm ARPCanceling a lost target Lost target markInterpreting the Radar Display GeneralMinimum and maximum ranges Range resolution Radar resolutionBearing resolution Bearing accuracyMultiple echoes False echoesMultiple echoes Sidelobe echoesShadow sectors Virtual imageVirtual image Shadow sectorsAppearance of Sart signal on the radar display Sart Search and Rescue TransponderGeneral procedure for detecting Sart response General remarks on receiving SartSEA control Appearance of racon signal on the radar displayRacon Radar Beacon Rain controlPlotter Displays Full-screen plotter displayFull-screen plotter display Contents of nav data window Nav data windowCompass display Compass displayReading the XTE cross-track error monitor Setting the range for the XTE monitorXTE range setting window Highway display Highway displayNav data display Nav data displaysPlotter display, north-up mode North-upAuto course-up Plotter display, auto course-up modeCourse-up Plotter display, course-up mode, destination setChart Scale Charts scalesShifting the Display Chart Cards Chart card overviewChart icons and their meanings Indices and chart enlargement Sample chart Japan, showing indicesWhen a chart cannot be displayed Furuno and NavCharts charts Chart symbolsData for aids to navigation Current or tide data Port service iconsPlotter display, showing port service display Current data displayObjects window MAP chartsCursor and data display Example of caution area windowIcon data Lighthouse iconObject windows Sample lighthouse data Tide informationMap, port service display Tide windowDate window Own ship track Working with TrackDisplaying track Track control menuStopping, restarting plotting of own ship track Target tracksOwn ship track color window Changing track colorOwn ship’s track Target trackInterval window Track plotting method and interval for own ship trackTrack plotting method Track plotting intervalChanging own ship track/mark distribution setting Track memory windowErasing track Erasing own ship track by areaErase menu Erasing all own ship track Erasing own ship track by colorErase track by color window Erasing all target tracksChanging mark attributes Marks, LinesEntering a mark, line Marks & lines menuSelect Lines STYLE, then press the Aedit soft key Selecting line typeMarks shape window Lines style windowErasing an individual line Erasing marks, linesErasing an individual mark Erasing marks, lines by areaEntering a waypoint at own ship position WaypointsEntering waypoints Entering a waypoint with the cursorWaypoint mark shape selection window Waypoint mark color selection windowEntering a waypoint by range and bearing Alphanumeric and local waypoint lists Editing waypoint dataEntering a waypoint from the waypoint list Editing waypoint data from the waypoint listEditing a waypoint from the plotter display Plotter displayErasing a waypoint from the menu Erasing waypointsErasing a waypoint directly from the plotter display Erasing a waypoint from the waypoint listChanging waypoint mark size FURUNO, NavCharts Chart details menuSearching waypoints Alphanumeric listEntering a route with existing waypoints RoutesCreating routes Route menuNew route entry screen Entering a route with the cursorCreating voyage-based routes Save route menuSave route window Displays for entry of time, distance interval For manual entry of waypoints, do the followingTo stop recording waypoints and save the route Connecting routes Connect route windowEdit route menu Inserting waypointsInserting a waypoint from the route list Waypoint list for editing a route local listInserting a waypoint from the plotter display Inserting a waypoint in an intermediate location on a routeRemoving a waypoint from the route list Removing waypoints from a routeErasing routes Removing a waypoint from the plotter displaySelecting quick point entry method NavigationNavigating to a quick point Go to method windowSelecting a waypoint from the plotter display Navigating to waypointsNavigating to multiple quick points Selecting a waypoint from the waypoint listNavigating to ports, port services NavCharts/C-MAP Selecting an external waypointQP window Port services and sample port list Sample filling station locations southern ItalyPlotter display, route selected as destination Following a routeSelecting the route to follow Navigating waypoints in reverse orderExample of when to restart navigation Restarting navigationLog display Automatic waypoint switching methods Setting speed for ETA calculationSwitching waypoints Select speed for ETA windowCanceling route navigation Plotter alarm menu AlarmsAudio alarm on/off Audio alarm windowArrival alarm How the arrival alarm worksArrival alarm window Anchor watch alarm How the anchor watch alarm worksAnchor watch alarm window How the XTE alarm works XTE Cross-Track Error alarmSpeed alarm XTE alarm windowProximity alarm Proximity alarm windowProximity mark Trip alarm Trip alarm windowAlarm information Plotter alarm menu,Alarm messages Plotter alarm messages and their meaningsMessage Meaning Resetting Trip Distance General setup menu,Principle of Operation Underwater conditions and video sounder displayDisplay mode window Sounder DisplaysSelecting a sounder display Indications on the single frequency display Description of sounder displaysSingle-frequency display Selecting transmission frequencyHF picture Dual-frequency displayDual-frequency display LF picture Sounding area and transmission frequencyMarker-zoom display plus normal sounder display Bottom-zoom displayBottom-zoom display plus normal sounder display Bottom-lock display Bottom-lock display plus normal sounder displayScope display display only Bottom discrimination displayBottom discrimination display Scope displaySelecting screen split method in combination displays How the automatic sounder works How to enable automatic sounder operationAutomatic Sounder Operation Types of automatic sounder modesManual Sounder Operation Selecting the manual modeAdjusting the gain Selecting display rangeShifting the range Gain windowShift concept How to measure depth and time Measuring Depth, TimeReducing Interference Types of interferenceNoise limiter window Reducing Low Level Noise Appearance of clutterClutter window Signal level window Erasing Weak EchoesAppearance of weak echoes Color bar 16 color when white marker function is active White MarkerWhite marker window Picture Advance Speed Advancement independent of ship’s speedPicture advance window How the speed-dependent picture advance mode works Advancement synchronized with ship’s speedDisplay Colors Hue no. and background and echo colorsHue No Echo Color Background Color Sounder alarm menu Alarm audio windowBottom alarm window Bottom alarmFish alarm Fish alarm windowFish alarm B/L Fish alarm B/L windowWater temperature alarm Water temperature alarm windowWhen an alarm setting is violated Depth AlarmWater Temperature Graph Sounder alarm messages and their meaningsChanging Pulse Repetition Rate Bottom echo Interpreting the Sounder DisplayZero line Zero lineFish school echoes Fish school echoesSurface noise/Aeration Surface noise/aerationGeneral Setup General setup menuContents of general setup menu Radar Setup Radar display setupRadar display setup menu Contents of radar display setup menu Con’t on nextContents of radar display setup menu con’t from previous Radar range setup Radar range setup menuModel Maximum Range Radar function key menu Function key setupFunction Key Default Function Function Key Label Radar function key optionsRadar function keys Menu Item Function Function KeyPlotter Setup Plotter setup menu Contents of plotter setup menuNavigation options Function Default Function Function Key Label Plotter function key menuPlotter function keys Chart Setup Chart offsetPlotter display, chart offset selected FURUNO, NavCharts chart attributes Chart details menu FURUNO, NavChartsContents of chart details menu FURUNO, NavCharts Chart details menu C-MAP MAP chart attributesContour line menu FURUNO, NavCharts Bcntour Line soft keyContents of chart details menu C-MAP Settings description Adepth Info soft keyData Boxes Setup Data box menuHot Page Setup Hot page setup menuHot page setup menu, Split X 3 screen, sub screen selection HOTNavigator Setup Contents of nav setup menuNavigation data source GPS receiver setup Set equipped with GP-310B/320B GPS setup menu Contents of GPS setup menuContents of GPS setup menu con’t from previous Bgps Waas Setup Contents of Waas Setup menuDisplaying Loran C TDs TD display setupTD setup menu Loran GRI & station pair windowDisplaying Decca TDs Decca chain and station pair windowNav Data Display Setup Nav data setup screenNav data setup window Sounder system setup menu Sounder SetupSystem setup Sounder system setup menu descriptionSounder system setup menu description con’t from previous SM1-SM4, OFFSensor setup Sensor setup menuSensor setup menu settings Sounding range, zoom range, bottom lock range Sounder range setup menuDefault basic ranges Zoom range and bottom-lock rangesFunction Default Function Function Key Sounder function key menuSounder function key options Sounder function keys Memory Card Operations Formatting memory cardsSave data menu Saving data to a memory card Memory card messages Memory card messagesMessage Reason Remedy Playing back data from a memory card Load data menuHost name window Receiving Data Via Network EquipmentReceive data menu Marks & lines windowOutputting Data Through the Network Select sentence menuReplacement of the battery Preventive MaintenanceReplacement Maintenance programReplacement of the fuse Replacement of the magnetronReplace of the synchro belt Trackball Maintenance Part Type Code No Retainer ring and ball MU3721 000-144-645Radar troubleshooting Simple TroubleshootingGeneral troubleshooting RadarPlotter troubleshooting PlotterSounder troubleshooting SounderDiagnostics Memory I/O testMemory I/O Test menu GPS sensor test Requires GPS Receiver GP-310B/320B Processor unit testProcessor unit test results GPS receiver test resultsNetwork sounder test results ARP test resultsTest pattern Test pattern sequenceScreen for testing keyboard, remote controller Keyboard test of the control unitGPS Status Display GPS status displayClearing Memories Memory clear menuWindows for clearing memory Error Messages Error messagesError Message Meaning Remedy Menu Overview Menu keyAP-2 AP-3 AP-4 AP-5 AP-6 AP-7 AP-8 Plotter Alarms Alarm keyRadar Alarms Sounder AlarmsGeodetic Chart List World Time Chart Icons Icon MeaningWhat is WAAS? WaasThis page is intentionally left blank OfferedSP 1by Busse-Yachtshop.de OfferedSP 2by Busse-Yachtshop.de OfferedSP 3by Busse-Yachtshop.de OfferedSP 4by Busse-Yachtshop.de Specifications of Video Plotter GD-1900C-BB OfferedSP 6by Busse-Yachtshop.de Index Index-2 Index-3 Index-4 Index-5 Offered by Busse-Yachtshop.de Offered by Busse-Yachtshop.de Offered by Busse-Yachtshop.de

Related manuals

Manual 92 pages 42.7 Kb