Furuno FA-100 manual Junction Box, Mounting

1.3 Junction Box

Mount the junction box where the junction box is protected from rain and water splash.

Mounting

1.Open the lid of the junction box and fix the junction box with four tapping screws (5x20). Avoid bundling the 3.3 m cable of the junction box together with any power cable. This causes malfunction.

2.Connect cables to the terminal board, referring to Chapter 2 and 3.

3.Fix the lid after connecting external equipment.

4.Clamp the cable with several U-type cable clamps (local supply) at suitable intervals.

Clamp the cable with

U-type cable clamps.

Cable clamp

10