TANDBERG D13898.04 manual IP Address Setting Configuration

Installing the Content Server

IP Address Setting Configuration

About IP Address Setting IP Settings Menus Available

TANDBERG CONTENT SERVER USER GUIDE

The Content Server requires the IP Address Settings to be configured before it can be used. IP Address can be configured using the LCD Panel – see the block diagram to the right and the example below.

The front panel keys are used as follows:

Used to enter the edit mode and confirm selection or entry.

Used to return to the previous menu screen or exit the edit mode without saving the latest entry.

Used to select items in the menu, move between values in a numerical address and modify numerical values.

Tip! The IP address should be changed from DHCP (default) to a static IP address as soon as the Content Server is in production.

Menu title is shown in orange.

IP Settings

IP Assignment

IP Address

Subnet Mask

Default Gateway

DNS (Preferred)

DNS (Alternate)

To Commands

IP Assignment		Select Type:
		DHCP
Address Type:
		Static
IP Address		Edit Address	Save Changes?
			No
<IP address>	000.000.000.000
			Yes
Subnet mask		Edit Subnet	Save Changes?
			No
<IP address>	000.000.000.000		Yes
Default Gateway		Edit Gateway	Save Changes?
			No
<IP address>
	000.000.000.000		Yes
DNS (Preferred)		DNS Server	Save Changes?
			No
<IP address>	0.0.0.0
			Yes
DNS (Alternate)		DNS Server	Save Changes?
			No
<IP address>	0.0.0.0
			Yes

Table of	What’s New in	Trademark/	Safety/	Introduction	Installation	Quick Setup	Operation	Administrator	Conference	View	Appendices
Contents	this Version?	Licenses	Environmental					Settings	Setup	Conferences
D 13898.04					17
DECEMBER 2006