TANDBERG D13898.04 manual Using Templates for Multicast Delivery, Manage Your Server from

Adminstrator Settings > Template Editor			USER GUIDE
Using Templates for Multicast Delivery
			TANDBERG CONTENT SERVER
About Multicast Delivery		Multicast Setup for Windows Media Streaming Server
To start delivering your content as a multicast	Remote Desktop into your	Right-click on the existing TCSmulticastTemplate	Now right click on “Publishing Points” and
stream with Content Server version 2, you
need to ensure that:	 Content Server and choose	 and Select Remove from the drop-down menu.	 choose Add Publishing Point (Advanced).
• Your network is multicast-enabled	Manage Your Server from
• The Multicast Publishing point is correctly	the Start Menu.
set up on your Windows Media Streaming
Server (you only need to do this setup	 Click on Manage this
once)
• The recording template that you want
	streaming media server.

to use for multicast content delivery is configured correctly.

Expand the list next to the name of your streaming media server, then expand the list of Publishing Points.

			 Edit the Add Publishing Point pop-up as follows:				 Select the TCSmulticastTemplate Publishing Point you have just created
							and click on the Properties tab.
					Type
					TCSmulticastTemplate
					here
					Type Push:* here
PLEASE NOTE THAT MULTICAST SETUP					and click OK.
FOR WINDOWS MEDIA SERVER ONLY
NEEDS TO BE DONE ONCE, BEFORE
FIRST USING MULTICAST. ONCE ALL SETTINGS							Select Category Authorization and set WMS Publishing Points ACL
ARE APPLIED, YOU CAN USE MULTICAST BY
							Authorization to Enabled.
SIMPLY EDITING YOUR RECORDING TEMPLATE.											Cont...
Table of	What’s New in	Trademark/	Safety/	Introduction	Installation	Quick Setup	Operation	Administrator	Conference	View	Appendices
Contents	this Version?	Licenses	Environmental					Settings	Setup	Conferences
D 13898.04					65
DECEMBER 2006