TANDBERG D13898.04 manual Advanced H.323 Settings

Administrator Settings > Site Settings

Advanced H.323 Settings

TANDBERG CONTENT SERVER USER GUIDE

Use Static Ports is disabled by default. This means that the system will dynamically allocate which ports to use when opening a TCP/UDP connection.

Static ports can be enabled by selecting the checkbox and specifying the required range of ports.

Port Range. 3230 to 3250 is the standard firewall port range. It needs to be configured according to your local firewall settings.

NAT. Network Address Translation is used when the Server is connected to a router with NAT support. The default setting for NAT is OFF.

If NAT is ON, the system will signal the configured NAT address in place of its own IP address within Q.931 and H.245.

If NAT is set to AUTO, the system will try to determine whether the NAT address or the real IP address should be used for signaling. This is done to make it possible to make calls to endpoints on the LAN as well as WAN.

NAT Address. The NAT address must be the global, external address to a router with NAT support. In the router, the following ports must be routed to the system’s IP address:

Port 1720

Port 2326–2365

The port range specified by the Port Range field

Please contact your TANDBERG representative or authorized reseller for more information.

Fields with an orange asterisk next to them require you to restart the service in order for them to become effective if they have been changed.

Restart Service. Restart Service will terminate calls that are currently live (that is, the calls will be ended and conferences will not be available for on demand playback).

Before restarting the Service, check if there are live conferences in progress in the Live Conferences page or check the call status on the LCD panel of the unit. The Site Settings page will also display a warning if calls are in progress. If you click on the Restart Service button while calls are in progress, you will be asked to confirm if you want to go ahead with the Restart.

Table of	What’s New in	Trademark/
Contents	this Version?	Licenses

D 13898.04

DECEMBER 2006

Safety/	Introduction	Installation	Quick Setup	Operation	Administrator	Conference	View	Appendices
Environmental					Settings	Setup	Conferences

32