TANDBERG D13898.04 manual Optional QuickTime Installation, Install Only If Strictly Needed

Quick Setup

Optional QuickTime Installation

TANDBERG CONTENT SERVER USER GUIDE

!Install Only If Strictly Needed!

 Optional QuickTime Installation is only needed if you require calls to be recorded and streamed in the QuickTime® format.

If you will be recording calls in two formats only – Windows Media and Real Media formats, you do NOT need to install QuickTime on the server.

QuickTime can be installed and enabled on the Content Server at any time, so you can defer this installation until (and if) it is required.

The Content Server ships with QuickTime support turned off by default. Do not enable the QuickTime codec in the Codec Support settings unless QuickTime has been manually installed on the Content Server.

Due to an incompatibility between QuickTime Player versions 7.1 or higher and a critical Windows Server security update (MS06-015), only QuickTime Player version 7.0.4.0 should be installed on the Content Server.

At the time of publishing this user guide, the standalone installer for this version was available from http://www.apple.com/

Select QuickTime Templates for use

with your Recording Aliases to take advantage of the QuickTime output functionality and record your content for on

demand QuickTime playback.

Example:

Select QuickTime 2xStreams High with Dual - QT- DblHighDual.xml * from the drop-down menu in the Settings section of Recording Alias Options for a Transcoding template. Click Save.

Select QuickTime Archiving Single Stream QT-MOVStd.xml* from the drop-down menu in Settings section of Recording Alias Options for an Archiving template. Click Save.

!

Remote desktop to the IP address of the Content Server.

Due to the enhanced security configuration enabled for the Internet Explorer browser on the Content Server, you will be required to add this web page to the server’s trusted sites (deselect the Require Server verification https

for all sites in this zone checkbox). An alternative would be to download the QuickTime installer to your desktop machine and then copy it to the server’s Remote Desktop.

Log in to the Content Server web interface as an administrator.

Optional Installation – Only If Strictly Needed!

 Log in as an administrator.	 Use a Web Browser to navigate to the
	following download site to download
	Apple QuickTime player version 7.0.4.0:
	http://www.apple.com/support/
	downloads/quicktime704.html.
 Run the QuickTimeInstaller.exe file.	 Follow the installation prompts.

 Click on Finish when the installation has	 Log off to terminate the remote desktop
been completed.	connection.

In Administrator Tools

>Site Settings, enable QuickTime in the Site Codec Support section and click Save.

Table of	What’s New in	Trademark/	Safety/	Introduction	Installation	Quick Setup	Operation	Administrator	Conference	View	Appendices
Contents	this Version?	Licenses	Environmental					Settings	Setup	Conferences
D 13898.04					23
DECEMBER 2006