Administrator Settings > Template Editor > Real Writer

Specifying ServerPush Information

About ServerPush Information

The File Output Information Settings

TANDBERG CONTENT SERVER USER GUIDE

By default, Real Media templates do not have ServerPush Output specified. The ServerPush method, or pushing the live stream to a streaming server can be configured by using an external streaming server, for example a Helix Streaming Server.

Accessing these Settings

In the Real Writer Information Page, click on ServerPush to produce the ServerPush Output Information.

Server type. Select either Server 90 or

Server G2

Server name. IP address of external streaming server

Port. Specify a port that is not already being used.

Username, Password & Password confirm. For streaming off an external streaming server, enter the username & password to be used for authentication with your external streaming server.

Live and On demand Streaming of Real Media Content from an External Streaming Server

Transcoding and Archiving Real Media format content can be streamed live or on demand off external streaming servers (Helix or G2) .

ServerPush Output Information should be configured in the following way:

For streaming off a Helix server, the live streaming path should be rtsp://<servername>/encoder and the on demand path should be rtsp://<servername>/<archivefoldername>.

For on demand streaming, check Archive Enabled on the external server and set the On demand Output in the writer to ServerPush output.

For streaming off a G2 server, the live streaming path should be

rtsp://<servername>/broadcast foldername and the on demand path should be rtsp://<servername>/<archivefoldername>. For on demand streaming, check Archive Enabled on the external server.

Table of

What’s New in

Trademark/

Safety/

Introduction

Installation

Quick Setup

Operation

Administrator

Conference

View

Appendices

Contents

this Version?

Licenses

Environmental

Settings

Setup

Conferences

 

 

 

 

 

D 13898.04

 

 

 

 

59

 

 

 

 

 

DECEMBER 2006

 

 

 

 

 

 

 

 

 

Page 59
Image 59
TANDBERG D13898.04 manual Specifying ServerPush Information