TANDBERG D13898.04 About Restoring to Factory Settings, Config Restore Command Menu Structure

Basic Operating Principles

Restoring to Factory Settings

TANDBERG CONTENT SERVER

USER GUIDE

About Restoring to Factory Settings

The administrator can restore the Content Server to factory settings partially or fully via the LCD panel.

A partial restore to factory settings – Config Restore - restores the factory configuration files and templates, but does NOT affect the content stored on the server.

A full restore to factory settings – Full Restore

–removes content and deletes all media files in addition to restoring the factory configura- tion files and templates.

!will restore the Content Server to v.2.0 defaults, but it will also remove any Restoring to factory command in v.2.0

configurations specific to v.1.x, if the Content Server has been upgraded to v2.0 from v1.x!

Pressscreen.Enter to display the Main Menu

From the Commands menu, use the Up or Down arrow to select Restore Factory and press Enter.

Restoring to Factory Settings
 From the Main Menu screen, use	 Press Enter to confirm your selection.
the Up or Down arrow to select
Commands.

From the Restore Factory menu, use the Up or Down arrow to select Full Restore or Config Restore and press Enter.

Config Restore

Command Menu Structure Front Panel Keys

Deletes all user-created Recording Aliases, Call Configuration files and Recording Templates and restores them to v.2.0 defaults.

Full Restore

Deletes all user-created Recording Aliases, Call Configuration files, Categories and Recording Templates and restores them to v.2.0 defaults.

•Deletes all conferences and media files

•Deletes all server logs

•If data location has been changed to an ex- ternal storage location (NAS), a full restore will change the default storage location back to the Content Server.

Table of	What’s New in	Trademark/
Contents	this Version?	Licenses

D 13898.04

DECEMBER 2006

IP Settings are described in Installation.

IPSettings

Commands

Safety/ Introduction Environmental

Restart?

No

Yes

Shutdown?

No

Yes

- Restore Factory - Full Restore

Config Restore

Installation Quick Setup

27

Restart and Shutdown are described on the previous page.

Full Restore?

No

Yes

Config Restore?

No

Yes

Operation Administrator Settings

Used to enter the edit mode and confirm selection or entry.

Used to return to the previous menu screen or exit the edit mode without saving the lat- est entry.

Used to select items in the menu, move

between values in a numerical address and modify numerical values.

For an example of this, turn to IP Address Setting Configuration in the Installation section.

Conference	View	Appendices
Setup	Conferences