TANDBERG D13898.04 128, Creating and Handling Extra Clips From a Recording, Reshuffling Clips

Viewing Conferences > Editing Contents

Creating and Handling Extra Clips From a Recording

		Creating an Extra Clip
Do this when a conference is to be	 Drag the recording to the clips window.	 Causing it to look like this.
split into more than one continuous
piece from the original conference.

There may be two or more sections of a conference that you want users to view out of one conference so creating extra clips and editing each one is the way to achieve this result.

Click the Save button every few

minutes so that any changes that are made are kept. If you have made a change that you do not

want to keep, click the Revert button and the changes that were made after the last save will be discarded.

TANDBERG CONTENT SERVER

USER GUIDE

To make another clip from a recording, select the recording (in the orange part) in the left-hand window and drag it to the clips window.

Now change the in and out points of each clip and when the conference plays, clip 1 will be followed by clip 2 etc.

This feature is limited to ten clips per recording.

In and Out points of clips are described in Recordings and Clips.

Reshuffling Clips Deleting Clips

To change the order of clips, drag the clip to a new position or change the index number.

The order and index number will change and this will reflect in the playback of the conference.

Index No.

To delete all clips, select the checkbox at the top of the clips and click the Delete Selected button at the bottom of the clip list.

To delete individual clips, select the checkbox for the clip to delete then click the Delete Selected button at the bottom of the clip list.

Table of	What’s New in	Trademark/	Safety/	Introduction	Installation	Quick Setup	Operation	Administrator	Conference	View	Appendices
Contents	this Version?	Licenses	Environmental					Settings	Setup	Conferences
D 13898.04					128
DECEMBER 2006