TANDBERG D13898.04 manual About Basic H.323 Services, Initial Setup

Quick Setup

Basic H.323 Services Setup via Content Server Interface – Step 1

TANDBERG CONTENT SERVER USER GUIDE

About Basic H.323 Services

A quick basic setup of your TANDBERG Content Server includes:

1.Setting up H.323 services via the Content Server interface

. Making a test call recording

. Changing the administrator password and

setting up server date and time on the Windows Server.

In addition there is an optional QuickTime Installation available. This installation is only needed if you require calls to be recorded and streamed in the QuickTime® format.

If you will be recording calls in two formats only – Windows Media and Real Media formats, you do NOT need to install QuickTime on the server.

Make sure that the E.164 aliases and H.323 IDs are valid for your Gatekeep- er or Border Controller.

You can register the Content Server with either Gatekeeper or Border Controller. For simplicity in this User guide we’ll use ‘gatekeeper’ to refer to either device.

!should be used for administrative functions such as system upgradesThe default local administrator account

and updates and when using Remote Desktop access to the Content Server. It is therefore very important to change your password as described in the Windows Server Setup section.

 For more on setting the administrative properties and user configuration, see

the Administrator Settings section.

Start a Web browser and enter the IP address of the Content Server. You can use either http or https, with https recommended for administrative access.

Go to the Administrator Settings > Site Settings to set the System Name and E.164 alias for the Content Server.

Initial Setup

When prompted for login, enter the username administrator and password.

If required, set Gatekeeper registra- tion to Enabled, select Gatekeeper Discovery method (Auto or Manual) and set the Gatekeeper IP address.

You can choose to register the Content Server as a Terminal or a Gateway. If you select Gateway registration, you will need to enter H.323 and E.164 Gateway prefixes.

Go to Conference Setup> Recording Alias Options. Edit the E.164 aliases and H323 IDs for the default Recording Aliases and save.

Save the Site Settings. You may refresh the browser page to check if gatekeeper registration has been successful.

Table of	What’s New in	Trademark/	Safety/	Introduction	Installation	Quick Setup	Operation	Administrator	Conference	View	Appendices
Contents	this Version?	Licenses	Environmental					Settings	Setup	Conferences
D 13898.04					20
DECEMBER 2006