TANDBERG D13898.04 manual Editing, Duplicating or Creating a New Call Configuration

Administrator Settings > Call Configuration Editor

Editing, Duplicating or Creating a New Call Configuration

About Editing The Call Configuration Editor Page

This is very similar to the template editing described in the articles on Template Editor.

System templates cannot be altered

–instead they have to be duplicated and saved under a new name to allow changes to be made.

Non-system templates, however, may be edited – these have the Edit link appended to them in the listing.

The Call Configuration Editor Page is shown here as it looks when New has been selected (see previous page for more on this).

TANDBERG CONTENT SERVER

USER GUIDE

Filename. The Filename uniquely identifies each call configuration file.

Description. Use the Description field to provide a short description of your call configuration file

H.239 Capabilities Enabled. H.239 Ca- pabilities are enabled by default. If H.239 Dual Video output is not required, this capability can be disabled.

Supported Resolutions. Administrators can select the resolutions for acceptable H.239 video input. For optimal performance, it is recommended that the maximum resolution be set to 800x600 or 640x480.

Call Options. The supported call speeds and maximum time in call can be set for call configuration.

Supported call speeds (kbps). The administrator can select the supported call speeds for calls from a range of options from 128 to 2048 Kbps. This determines the range of available conference bandwidths when a user dials out from the TANDBERG Content Server.

Advertised Codecs. The TANDBERG Content Server supports advertising of video and audio codecs as part of the capability set negotiation.

Advertise video codecs. The administrator can enable advertising of video codecs for each call configuration by selecting the checkbox. Supported advertised codecs.

Advertise audio codecs. The administrator can enable advertising of audio codecs for each call configuration by selecting the checkbox. Supported advertised codecs include G.711, G.722 and G.722.1.

Maximum time in call (mins). This feature will automatically end both incoming and outgoing calls when the call time exceeds the length of time specified in minutes. The default setting in the Full Call Configuration template is 0, which means that the call will never be automatically ended. The default value for new call configurations is 600.

Table of	What’s New in	Trademark/	Safety/	Introduction	Installation	Quick Setup	Operation	Administrator	Conference	View	Appendices
Contents	this Version?	Licenses	Environmental					Settings	Setup	Conferences
D 13898.04					69
DECEMBER 2006