TANDBERG D13898.04 manual Specifying Network Output Information

Administrator Settings > Template Editor > Windows Media Writer

Specifying Network Output Information

About Network Output Information The Network Output Information Settings

TANDBERG CONTENT SERVER USER GUIDE

Network is used to add the network sink or server pull functionality to the Content Server. It can only be used for Windows Media in situations where you want the external server to request the stream.

A network publishing point has to be created on the external Windows Media server to take advantage of this functionality.

Enter the Content Server name and port for Server Pull of the data.

Accessing these Settings

In the Windows Media Writer Informa- tion Page, click on Network to produce the Network Output Information.

Server name. Enter the IP address of the Content Server or (local) will be interpreted as IP that the Content Server is using.

Port. Select a port that is NOT being used on the Content Server (see Appendix 5 for a list of ports used by the Content Server)

The streaming path will be mms:\\ <server name>\<publishing point>, where:

•server name is the external Windows Media server name

•publishing point is the publishing point you have created on the external Windows Media server.

You may change the title by following instructions described for File Output.

Table of	What’s New in	Trademark/	Safety/	Introduction	Installation	Quick Setup	Operation	Administrator	Conference	View	Appendices
Contents	this Version?	Licenses	Environmental					Settings	Setup	Conferences
D 13898.04					51
DECEMBER 2006