TANDBERG D13898.04 Examples on Front Panel Operation, Example 2 Setting the IP Address Itself

Installing the Content Server

Examples on Front Panel Operation

TANDBERG CONTENT SERVER USER GUIDE

Set the IP Address to Static!

Example 1: Setting the IP Assignment

We strongly recommend that you change the IP address from DHCP to Static once the Content Server is in production.

Use the examples on this page together with the diagram on the previous page to set the IP address.

To set the Subnet mask, Default gateway and DNS IP addresses, follow the steps described in Example 2 : Setting the IP address.



Press Enter to produce the menu. The display shows two lines at a time:

Main Menu

IP Settings

The upper line is the menu title (as shown here) or a text describing a submenu or the setting shown (as in the example to the right). The settings available can be



Selecting IP Settings >

IP Settings

IP Assignment

IP Address

Subnet Mask

Default Gateway

DNS (Preferred)

DNS (Alternate)

IP Address

Use the Arrow keys to scroll up and down and have the settings shown displayed one by one. The menu title will be retained.



Press Enter to enter the submenu:

Select Type:

DHCP

Static

Use the Arrow keys to scroll down to Static.

Press Enter to put the change into effect and proceed to specify the IP address.

displayed one by one (the upper line is retained) by scrolling up and down.

The IP Settings has six submenus. Use the Arrow keys to locate IP Assignment

Example 2: Setting the IP Address Itself



Press Enter to produce the menu. The display shows two lines at a time:

Main Menu

IP Settings

The upper line is the menu title (as shown here) or a text describing a submenu or the setting shown (as in the example to the right). The settings available can be



Selecting IP Settings >

IP Settings

IP Assignment

IP Address

Subnet Mask

Default Gateway

DNS (Preferred)

DNS (Alternate)

IP Address

Use the Arrow keys to scroll up and down and have the settings shown displayed one by one. The menu title will be retained.



Press Enter to enter the submenu:

IP Address

010.047.005.282

Press Enter to edit the address. The first digit will now blink.

Use the Arrow keys to scroll through the numbers (0–9) and press Enter when the number requested appears. The next digit will



Press Enter to bypass any digit not in need of adjustment.

When all digits have been set pressing Enter will produce the Save Changes menu.

Use Arrow keys to select applicable option.

Use Enter to exit the menu putting changes into effect.This will take you back to the IP Settings menu.

If you need to change other settings repeat the procedure selecting the applicable IP Setting submenu (e.g. Default Gateway) first.

displayed one by one (the upper line is retained) by scrolling up and down.

The IP Settings has six submenus. Use the Arrow keys to locate IP Address

then start to blink.

Repeat until the final digit has been set.

Use Return to leave a menu undoing any changes. This will also take you back to the IPSettingsmenu.

Table of	What’s New in	Trademark/
Contents	this Version?	Licenses

D 13898.04

DECEMBER 2006

Safety/	Introduction	Installation	Quick Setup	Operation	Administrator	Conference	View	Appendices
Environmental					Settings	Setup	Conferences

18