Furuno FA-100 manual Error message

Page 34

12.Set L/L position, COG and SOG data priority with the numeric keys according to sensors connected.

COG: Course over ground

SOG: Speed over ground

13.Press the [ENT] key to return to the I/O PRIORITY window.

Note: If you have entered 8, 9 or the same value for more than one item at step 12, the following error message appears. In this case, press the [ENT] key and set the priority correctly.

[ERROR]

CAN NOT INPUT SAME VALUE !

ESC: [ENT]

[ERROR]

OUT OF RANGE ! PRIORITY: 1-7

ESC: [ENT]

ERROR message

14.Set the priority for HDG and ROT similar to how you did for “L/L COG SOG”. The priority of heading data entered from the AD-10 IN port is the lowest.

15.To set the priority of AIS, press the [4] key to choose AIS.

[AIS]

RESPONSE:PC + -

- - - - - - - - - - - - - - - - - - - -

EX1 : ENBL

+ -

LR : ENBL

+ -

PC : ENBL

+ -

LAN: ENBL

+ -

DEFAULT: [CLR]

 

AIS PRIORITY setting window

16.With RESPONSE selected, press the [SFT] key to select PC, NONE, LAN, EX1 or LR as appropriate.

Set an output port for response from other party after you transmit messages or interrogation from the PC, ECDIS, LR, or LAN.

NONE

: No output for response

PC

: Output to PC I/O port

LAN

: Output to LAN port

LR

: Output to LR or ECDIS/RADAR port

EX1

: Output to EXTRA1 port

The PC I/O port provides RS-422 and RS-232C terminals. For example, to connect a PC for pilot, connect it to the RS-422 terminal and set 34.8 Kbps for bit rate on the PC I/O option in the I/O SPEED window.

17.Press the [NEXT] key to select EX1, LR, PC or LAN.

18.Press the [SFT] key to select ENBL (enable) or DSBL (disable) as appropriate. This setting is for communication between FA-100 and each external equipment. “DSBL” disables communication with selected item.

19.Press the [ENT] key and then [MENU] key to return to the SET I/O PORT sub-menu.

28

Image 34
Contents Uais Transponder 00080932513 Safety Instructions Table of Contents System Configuration GPS/VHFStandard supply Equipment ListsOptional supply Antenna Unit MountingExtending antenna cable How to attach connector N-P-8DFB VHF antenna Location Horizontal separation distance How to attach the plug M-P-7 3 GPS/VHF combined antennaMounting procedures Installing distributor unit DB-1 Transponder Unit Desktop mountingFlush mount kit a Type OP24-1 Code no Flush mountingFlush mount kit B Type OP24-2 Code no Junction Box MountingPower Supply option Pilot Plug optionWiring GPS/VHF Conbined Antenna GVA-100 Distributor unit DB-1Armor Cable fabrication ConnectionINPUT/OUTPUT Signal Inputs from SensorsInput/Output of AIS Signal TB1 in the junctionboxInput of Gyrocompass Signal Alarm Signal OutputLAN Input/Output Pilot PlugJumper Setting in the Junction Box Input/Output Sentences GngpgllcinChanging Ship’s Mains Specifications 100-115 VAC White BlackSetting and Adjustment Setting MMSI, IMO No., Name and Call SignPage Setting GPS Antenna Position and Ship’s Type SET Antenna POS windowPress the ENT key to return to the Init Setting sub-menu System Settings System Settings sub-menuPriority window Error message SET LAN IP Addr window This page is intentionally left blank Packing List CB-100-A、CB-100-A-HK GVA-100 工事材料表 PR-240-CE GP-1850,GP-1650,FA-100,GP-1640/F SC-60/120,GD/GP-280/680/380 20AG-X-9405 マスト取付金具 Page Page Page Page May 20 Page Jan Jan Page Page Page Page Page Hatai

FA-100 specifications

The Furuno FA-100 is a sophisticated maritime communication and navigation technology designed to enhance safety and situational awareness for vessels operating in both commercial and recreational capacities. The device is particularly popular among the fishing, cargo, and passenger transport industries, where precise navigation and reliable communication are paramount.

One of the standout features of the FA-100 is its AIS (Automatic Identification System) capabilities. This technology enables vessels to automatically send and receive information about their position, course, and speed, significantly improving situational awareness by allowing ships to detect and track nearby vessels. With its dual-channel AIS receiver, the FA-100 can monitor a wide range of traffic in busy shipping lanes, making it easier for operators to avoid potential collisions and navigate safely.

The FA-100 boasts robust GPS functionality, providing accurate position data that is critical for navigation. This positioning system is enhanced by the use of advanced satellite technology, ensuring reliable location tracking even in challenging environments such as dense urban areas or adverse weather conditions. With its high update rate, navigators receive timely information, allowing for informed decision-making.

Additionally, the Furuno FA-100 includes various interface options, facilitating the integration with other onboard systems. The device can connect seamlessly with radar, chart plotters, and other navigation equipment, creating a cohesive and comprehensive navigational network. This interoperability enhances overall situational awareness and simplifies vessel operation by providing a unified interface for monitoring and controlling different systems.

Durability is another essential aspect of the FA-100, as it is built to withstand harsh marine environments. Its weatherproof design ensures reliable performance even under extreme conditions, while the user-friendly interface allows operators to access and interpret data quickly and efficiently. The intuitive display is designed to provide clear and concise information, making it suitable for users of varying experience levels.

Overall, the Furuno FA-100 is a highly effective tool for marine navigation and communication. With its advanced AIS capabilities, reliable GPS, extensive interfacing options, and rugged design, it stands out as an essential device for enhancing the safety and efficiency of maritime operations.