Furuno 1942 MARK-2 manual Basic Operation, Control Description

2. BASIC OPERATION

2.1 Control Description

Requires Auto Plotter ARP-10 Brief press:

Displays the data of target selected with the cursor.

Long press:

Terminates plotting of the target selected with the cursor.

Opens/closes menus.

Selects EBL1/EBL2/VRM1/VRM2.

Control:

Adjusts sensitivity.

Switch:

Temporarily erases heading marker (and north marker if displayed).

Control:

Reduces sea clutter.

Switch*:

(Long press) Shifts your vessel s position to cursor location. (Brief press) Doubles size of area between your vessel and location selected by cursor.

Control:

Reduces rain clutter.

Switch*:

Displaces the EBL origin.

Lights when the economy mode is on.

		Omnipad
		Shifts cursor, VRM and EBL;
		selects items and options on
		menu.
		(1) Acquires the target selected
SELECT	ACQ	with the ominipad. (Requires
		Auto Plotter ARP-10.)
CANCEL	ENTER
		(2) Registers selection on
		menus.
MENU	GUARD	Sets guard zone area.
RANGE		Selects radar range.
EBL/VRM	EBL/VRM	Enables/erases
SELECT	CONTROL
		EBL1/EBL2/EBL3/EBL4.
GAIN
	TLL	Outputs target position data.
HM-OFF
A/C SEA	A/C AUTO	Automatically reduces sea and
		rain clutters.
F1	BRILL	Adjusts display brilliance.
A/C RAIN
	ST BY	Sets radar in stand-by;
	TX
		transmits radar pulse.
F2

POWER Turns power on/off.

*Default switch function.

Figure 2-1 Control panel

2-1