Xantrex Technology 975-0205-01-01 manual

Page 19

If an AC product rated higher than 100 W is plugged into the XPower inverter, the inverter will shut down. The red fault light comes on.

If the XPower inverter exceeds a safe operating temperature, due to insufficient ventilation or a high-temperature environment, it automatically shuts down. The red fault light comes on.

Should a defective battery charging system cause the battery voltage to rise to dangerously high levels, the XPower inverter automatically shuts down. The red fault light comes on.

CAUTION

Although the XPower inverter incorporates protection against over-voltage, it may still be damaged if the input voltage exceeds 16 V.

In the event of an overload, low battery voltage or overheating, the XPower inverter automatically shuts down.

14

Image 19
Contents XPower Pocket Inverter About Xantrex Date and Revision Contents Specifications Introduction Page Important Safety Information Page Page Page Additional Safety Guidelines Safety Features Inverter Features Using the DC Cable with Cigarette Lighter Plug Using the Inverter Using the DC Cable with Airplane Power Plug Airline Compatibility Operating Guidelines Inverter OperationPage Interference with Electronic Equipment Battery Operating TimeBuzzing sound in audio systems and radios Possible cause Remedy TroubleshootingProblem AC product will not operate, red Fault light on Replacing the Fuse AC Power Output SpecificationsUSB Power Output Physical Specifications DC Power SpecificationsWarranty Warranty and ReturnPage Page Page Product DisclaimerExclusions Page Return Material Authorization Policy Return Procedure Out of Warranty Service