Before YOU Begin

The model is a waterline type ( no hull below the waterline ). At 1/8" scale, it makes a fine shelf model mounted on a "sea" baseboard. It can also be used ef- fectively in an HO gauge model railroad setting. Although HO is 1/87 scale, 1/8" ( or 1/96) is close enough for the HO layout. What you will have is slightly smaller boat.

This kit contains a solid hull which has been machined carved from select, medium hard, fine grained basswood. This style hull provides a quick and easy lesson in the basic shapes and propor- tions of hull design and helps to develop woodworking skills. The exterior of the TAURUS hull has been carved close to the intended shape, so a simple sanding is all that is required. Some carving is re- quired for the bulwarks. Shaping and finishing the hull to its final shape are discussed in the instructions.

If you are a beginner, take your time. This model is fairly simple to build but still re- quires some time and concentration.

Make sure you complete one stage before moving to the next. When things go awry, consider doing it over. Completing this model will prepare you for a more complicated solid hull model such as the Fishing Schooner ELSIE or the Colonial Schooner SULTANA. Good luck!