Pelican PUV-Basic owner manual Disinfecting the Water Lines

Page 13

DISINFECTING THE WATER LINES

UV systems disinfect the water using ultraviolet light, treating the water as it passes through the system. When there is a risk that water downstream of the UV system has been contaminated, it is critical that these water lines be chemically disinfected. Disinfection of the water lines is therefore required after initial system installation and following any period of time during which the system is inoperative, whether due to an alarm condition, a power failure, or for any other reason. Make sure the UV system is on during the entire disinfecting process.

1

Make sure power supply is plugged in for

4

 

entire disinfection process.

 

2

5

(sodium hypochlorite)

3

6

7

11

INSTALLATION OVERVIEW

OPERATION

MAINTENANCE

WARRANTY

Image 13
Contents PUV-8 Potential Safety Measures Hazard Safety Instructions Table of Contents PUV-Basic PUV-8 PUV-16 What Model do I HAVE?General All Models SpecificationsPart ComponentsPart Number Part Model Part Number Components All ModelsDimensions and Layout Water Quality Requirements Installing the UV System Gfci Disinfecting the Water Lines Allow water to fill Installation Overview Operation Maintenance Warranty Green Yellow Flashing red Solid red Overview OperationinstallationSymptom Possible cause Possible solution TroubleshootingOverview Installation Operation Maintenancewarranty Lamp tab Sleeve bolt Operationmaintenance Warranty Our Commitment Warranty