Pelican PUV-Basic owner manual Maintenancewarranty

1

2

3

Open a tap downstream of the UV unit to release pressure.Then, close this tap.

6		OVERVIEW
	2
		1 Squeeze
		tabs
7	Strain relief	INSTALLATION
	wires should
	remain
	connected.

8	Hold by		2
	sleeve bolt			OPERATION
	to remove
	lamp/sleeve
	assembly.	1

4

5

Let the system cool for 10 minutes.

9For sleeve cleaning only:

Skip to step 14.

Note: Sleeve must be replaced if it cannot be completely cleaned or if it appears scratched or cracked.

For lamp or sleeve replacement:

Clean sleeve and follow steps 10-13.

17

MAINTENANCEWARRANTY