■NEVER use accessories or attachments, which are not recommended by Multiquip for this equipment. Damage to the equipment and/or injury to user may result.
■NEVER pump volatile, flammable or low flash point fluids. These fluids could ignite or explode.
■NEVER pump corrosive chemicals or water containing toxic substances. These fluids could create serious health and environmental hazards. Contact local authorities for assistance.
■NEVER open the priming plug when pump is hot. Hot water inside could be pressurized much like the radiator of an automobile. Allow pump to cool to the touch before loosening plug.
■NEVER open the pump housing during operation or start the pump with the cover off. The rotating impeller inside the pump can cut or sever objects caught in it.
■NEVER block or restrict flow from discharge hose. Remove kinks from discharge line before starting pump. Operation with a blocked discharge line can cause water inside pump to overheat.
■NEVER Run engine without air cleaner. Severe engine damage may occur.
■Check the air cleaner blockage indicator daily. If the rubber bellows is pulled inwards this indicates restricted air flow, replace air cleaner.
■Always read, understand, and follow procedures in Hatz Engine Operator’s Manual before attempting to operate equipment.
■Always be sure the operator is familiar with proper safety precautions and operations techniques before using pump.
■Always store equipment properly when it is not being used. Equipment should be stored in a clean, dry location out of the reach of children.
■Refer to the Hatz Engine Owner's Manual for engine technical questions or information.
■Always fill the pump casing with water before starting the engine. Failure to maintain water inside the pump housing will cause severe damage to the pump.
■In winter drain water from pump housing to prevent freezing.
RULES FOR SAFE OPERATION
■Always make sure pump is correctly secured to the trailer. Check all supports attaching the pump to the trailer and make sure they are tight.
■Always make sure that the pump's trailer is placed on solid level ground so that it cannot slide or shift around, endangering workers. Place blocks under the trailer's bumper to make it level (prevents tipping), and use a chocked block underneath the wheels to prevents rolling. Also keep the immediate area free of bystanders.
■HighTemperatures – Allow the engine to cool before adding fuel or performing service and maintenance functions. Contact with hot components can cause serious burns.
Emergencies
■Always know the location of the nearest fire extinguisher and first aid kit. Know the location of the nearest telephone. Also know the phone numbers of the nearest ambulance, doctor and fire department. This information will be invaluable in the case of an emergency.
Maintenance Safety
■NEVER lubricate components or attempt service on a running machine.
■Always allow the machine a proper amount of time to cool before servicing.
■Keep the machinery in proper running condition.
■Fix damage to the machine immediately and always replace broken parts.
■Dispose of hazardous waste properly.Examples of potentially hazardous waste are used motor oil, fuel and fuel filters.
■DO NOT use food or plastic containers to dispose of hazardous waste.
■DO NOT pour waste, oil or fuel directly onto the ground, down a drain or into any water source.
MQ41TDH TRASH PUMP — PARTS & OPERATION MANUAL — REV. #3 (04/02/07) — PAGE 9