Ingersoll-Rand 670106 manual Assembly Torque Requirements, Lubrication / Sealants, Torque Sequence

PARTS LIST / 670106 FLUID SECTION

		FOR THE AIR MO-
61		TOR SECTION, SEE
		PAGES 6 & 7.
26 ￿￿
68
175 ￿ 70 ￿ 70 ￿ 29 ￿ 1	5	￿ ￿ 7	6 ￿

￿ 144 ￿ 175 144 ￿

69 180 131￿￿

60

26 ￿￿	Figure 2
32

)ASSEMBLY TORQUE REQUIREMENTS (

NOTE: DO NOT OVERTIGHTEN FASTENERS.

ALL FASTENERS ARE METRIC.

(5)Stud, 90 ft lbs (122 Nm) maximum.

(6)Diaphragm screw, 65 - 70 ft. lbs (88.1 - 94.9 Nm).

(26)Screw, 60 - 70 ft lbs (81.3 - 94.9 Nm).

(27)Screw, 60 - 70 ft lbs (81.3 - 94.9 Nm).

(131)Screw, 35 - 40 ft lbs (47.5 - 54.2 Nm).

LUBRICATION / SEALANTS

cApply Lubriplate FML-2 grease (94276) to all “O” rings, “U” cups and mating parts.

dApply Loctite® 242® to threads at assembly. e Apply Loctite 271™ to threads at assembly.

f Apply anti-seize compound to threads and bolt and nut flange heads which contact pump case when using stainless steel fasteners.

NOTE: Lubriplate FML-2 is a white food grade petroleum grease.

31

58

76

24

Torque Sequence

22 21

19 ￿

27 ￿￿

15

22

19 ￿

21

670106 (en) Page 5 of 8