(3) Coin Lock
Locks the door.
(4) Cleaning Water Outlet
Dispenses cleaning water (sanitizing water in flushing process). Should be connected with the cleaning water outlet [remote].
(5) Sanitizing Water Outlet
Dispenses sanitizing water (cleaning water in flushing process). Should be connected with the sanitizing water outlet [remote].
(6) Water Supply Inlet
Should be connected with the water supply hose (G3/4) provided.
(7) Panel
Only a responsible maintainer or service personnel may open.
(8) Rear Panel
Only a responsible maintainer or service personnel may open for connection of the remote controller cable.
(9) Panel (L)
Only a responsible maintainer or service personnel may open. (10) Panel (R)
Only a responsible maintainer or service personnel may open for connection of the remote controller cable.
(11) Leg
Do not remove. Not adjustable. Use spacers, if required, for stable installation. (12) Drain Outlet
Can be connected with a drain pipe (G1/2), if the internal water circuit should be drained.
(13) Power Cord
Single phase 115V. Be careful not to jerk or pinch. (14) Salt Water Filter
Removes foreign matter from concentrated salt water in the salt water tank. Do not clog. Clean at least once a month.
(15) Salt Water Hose
Supplies concentrated salt water from the salt water tank. Do not curve or bend by force.
(16) Remote Controller Receptacle
Connects the remote controller cable with the electrolyzer body. Remove the grommet, and attach the super lock of the remote controller.
(17) Operation Panel [Remote]
For the remote controller. Attachable at a point of use. (18) Cleaning Water Outlet [Remote]
Should be connected with the cleaning water outlet to dispense cleaning water (sanitizing water in flushing process).
(19) Sanitizing Water Outlet [Remote]
Should be connected with the sanitizing water outlet to dispense sanitizing water (cleaning water in flushing process).
(20) Controller Bracket
Fixes the remote controller. Secure on a wall with anchor bolts.
15