Graco 206700, 206699, 206405 important safety instructions Symbols, Equipment Misuse Hazard

Page 2

Symbols

Caution Symbol

CAUTION

This symbol alerts you to the possibility of damage to or destruction of equipment if you do not follow the instructions.

Warning Symbol

WARNING

This symbol alerts you to the possibility of serious injury or death if you do not follow the instructions.

WARNING

INSTRUCTIONS

EQUIPMENT MISUSE HAZARD

Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury.

DThis equipment is for professional use only.

DRead all instruction manuals, tags, and labels before operating the equipment.

DUse the equipment only for its intended purpose. If you are not sure, call your Graco distributor.

DDo not alter or modify this equipment. Use only genuine Graco parts and accessories.

DCheck equipment daily. Repair or replace worn or damaged parts immediately.

DDo not exceed the maximum working pressure stated on the equipment or in the Technical Data for your equipment. Do not exceed the maximum working pressure of the lowest rated component in your system.

DUse fluids and solvents which are compatible with the equipment wetted parts. Refer to the Tech- nical Data section of all equipment manuals. Read the fluid and solvent manufacturer’s warnings.

DHandle hoses carefully. Do not use hoses to pull equipment.

DRoute hoses away from traffic areas, sharp edges, moving parts, and hot surfaces. Do not expose Graco hoses to temperatures above 66_C (150_F) or below –40_C (–40_F).

DWear hearing protection when operating this equipment.

DDo not lift pressurized equipment.

DComply with all applicable local, state, and national fire, electrical, and safety regulations.

2 306531Z1

Image 2
Contents Instructions-Parts List Table of ContentsSymbols Equipment Misuse HazardSkin Injection Hazard Fire and Explosion Hazard 306531Z1 Installation System AccessoriesGrounding To ground the pumpOperation Pressure Relief ProcedureStarting and Adjusting the Pump 306531Z1 Flushing MaintenanceShutdown and General Care LubricationPacking Nut Adjustment Troubleshooting Problem Cause SolutionBefore you start Air Motor ServiceAir Motor & Throat Disassembly Reassembly 30 31 34 † 33 † 45 † 32 † 58 53† 33† 45†Air Motor Service Displacement Pump Service Displacement Pump DisassemblyDisplacement Pump Service Parts Model 206405, Series K 35 lb. pail size 20 306531Z1 Model 206699, Series J 120 lb. drum size 22 306531Z1 Mounting Hole Layout DimensionsTechnical Data Graco Standard Warranty Graco Phone Numbers