Graco 206405, 206699, 206700 important safety instructions Fire and Explosion Hazard

Page 4

WARNING

FIRE AND EXPLOSION HAZARD

Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition and result in a fire or explosion and serious injury.

DGround the equipment and the object being sprayed. Refer to Grounding on page 7.

DIf there is any static sparking or you feel an electric shock while using this equipment, stop spray- ing immediately. Do not use the equipment until you identify and correct the problem.

DProvide fresh air ventilation to avoid the buildup of flammable fumes from solvents or the fluid being sprayed.

DKeep the spray area free of debris, including solvent, rags, and gasoline.

DBefore operating this equipment, electrically disconnect all equipment in the spray area.

DBefore operating this equipment, extinguish all open flames or pilot lights in the spray area.

DDo not smoke in the spray area.

DDo not turn on or off any light switch in the spray area while operating or if fumes are present.

DDo not operate a gasoline engine in the spray area.

TOXIC FLUID HAZARD

Hazardous fluid or toxic fumes can cause serious injury or death if splashed in the eyes or on the skin, inhaled, or swallowed.

DKnow the specific hazards of the fluid you are using.

DStore hazardous fluid in an approved container. Dispose of hazardous fluid according to all local, state and national guidelines.

DAlways wear protective eyewear, gloves, clothing and respirator as recommended by the fluid and solvent manufacturer.

4 306531Z1

Image 4
Contents Instructions-Parts List Table of ContentsSymbols Equipment Misuse HazardSkin Injection Hazard Fire and Explosion Hazard 306531Z1 Installation System AccessoriesGrounding To ground the pumpStarting and Adjusting the Pump Pressure Relief ProcedureOperation 306531Z1 Maintenance Shutdown and General CareFlushing LubricationPacking Nut Adjustment Troubleshooting Problem Cause SolutionAir Motor & Throat Disassembly Air Motor ServiceBefore you start Reassembly 30 31 34 † 33 † 45 † 32 † 58 53† 33† 45†Air Motor Service Displacement Pump Service Displacement Pump DisassemblyDisplacement Pump Service Parts Model 206405, Series K 35 lb. pail size 20 306531Z1 Model 206699, Series J 120 lb. drum size 22 306531Z1 Technical Data DimensionsMounting Hole Layout Graco Standard Warranty Graco Phone Numbers