Repair
Remove Air Motor | Install Air Motor |
1.Follow the Pressure Relief Procedure on page 10.
2.Disconnect Displacement Pump, page 18.
3.Disconnect air hose from air motor fitting (7). See page 22.
4.Remove Quick Coupler, page 12.
5.Remove screws (3) and washers (2) that secure air motor to mounting plate (320).
320
2
3
1.Using a secure hoist, attach motor to mounting plate (320) with screws (3) and washers (2). See FIG. 17.
2.Connect Displacement Pump, page 18.
3.Connect air hose to air motor fitting (7). See page 22.
ti20255b
FIG. 17
6.Using a capable hoist connected to air motor lift ring, secure air motor to hoist and remove air motor.
3A2798D | 19 |