INTRODUCTION
The X-65 is the latest member of the Lowrance family that combines a high performance sonar with a wide screen. Using menu features and “soft- key” operation, the X-65 is also one of the easiest to use sonars that Lowrance® has ever built. The wide “Clearvision” screen shows the underwater world with high resolution and detail. The display and key- board are also lighted for night operation. The X-65 has digital boat speed, surface water temperature, and distance travelled (log) screens.
SPECIFICATIONS | |
Dimensions | 5 7/8"H x 7 3/4"W x 3 7/8"D |
Transmitter Frequency | 192 kHz |
Transmitter Power | 600 watts (p-p, typical) |
| 75 watts (RMS, typical) |
Display | Supertwist "Clearvision" LCD |
| 160 vertical x 160 horizontal |
| 25,600 total pixels |
NOTICE!
The storage temperature for your unit is from -4 degrees to +167 degrees Fahrenheit (-20 degrees to +75 degrees Celsius). Extended storage in temperatures higher or lower than specified will damage the liquid crystal display in your unit. This type of damage is not covered by the warranty. For more information, contact the factory's Customer Service Department or your local service center.
INSTALLATION
MOUNTING
Install the X-65 in any convenient location, provided there is clearance behind the unit when it is tilted for the best viewing angle. Holes in the bracket base allow wood screw or through-bolt mounting. You may need to place a piece of plywood on the back of thin fiberglass panels to secure the mounting hardware. Make certain there is enough room behind the unit to attach the power and transducer cables.
The X-65's gimbal bracket will also accept the GBSA-1 swivel bracket adapter that lets you rotate the unit a full 360°.
The smallest hole that allows one power or transducer connector to pass through is 3/4". After the hole is drilled, push the transducer connector up through the hole first, then drop the power cable down through it.