Saving and Replaying a Sonar Record
To save a sonar chart: 1.Press the MENU key.
2.Select “Sonar Chart Logging”. The screen at right appears.
3.To save the chart as “Chart 1”, select “Start Logging” and press the ENT key. If you want to use a different file name, select “File Name” and name a new file. The Sonar Chart Logging menu is erased.
4.The unit records the current sonar data to the MMC.
5.To stop recording, select “Sonar Chart Logging” as shown above. Select “Stop Logging” from the menu. The menu is erased and the unit stops logging the chart data.
To replay a sonar chart: 1.Press the MENU key twice. 2.Select “Sonar Setup”. 3.Select “Sonar Simulator”. 4.Select “Chart Used” and
choose the file name that you used when the chart was saved. In this example, it’s “Chart 1.slg”.
5.Select “Sonar Simulator On”. The unit will switch to the simulator mode, reading the
chart data from the file that you saved on the MMC.
69