Lowrance electronic LCX-15CT, LCX-15CI manual Accessory Connections, Speed/Temperature Connections

Page 9

COM-1

LCX-15CI/

15CT

ORANGE (RECEIVE)

SHIELD (GROUND)

NMEA TRANSMIT

GROUND

FROM GPS RECEIVER

The LCX-15CI/15CT can accept position information from any GPS receiver that transmits NMEA 0183 data. Use the wiring diagram shown above for NMEA input to the LCX-15CI/15CT.

See page 25 and 26 for NMEA and DGPS com port setup instructions.

Accessory Connections

The rear of this unit has three connectors: Power/Data, GPS, and Trans- ducer. The power cable connects to the Power/Data connector, the cable from the GPS module goes to the GPS connector, and the transducer plugs into the Transducer connector.

	LOWRANCE
PWR/DATA	GPS MODULE	TRANSDUCER

Speed/Temperature Connections

This unit can use a speed sensor in addition to up to three temperature sensors.

All transom-mount “Skimmer” transducers have a temperature sensor built into them. To add another temperature sensor besides the one in the transducer requires a MY-4X “Y” adapter cable and a TS-2X temperature sensor. The transducer plugs into one end of the MY-4X, the TS-2X tem- perature sensor plugs into another, and the last end plugs into the SO- NAR port. The TS-2X temperature sensor has an extra connector for a TS-3X temperature sensor. This lets you have three temperature sen- sors, if desired.

Note: Do not combine the temperature sensors in any order other than shown on the next page. For example, do not use two TS-3X temperature sensors in place of one TS-2X and one TS-3X sensors. Each sensor is programmed to work only on the channel it’s designed for.

5

Image 9

Contents LCX-15CI LCX-15CT Never use this product while operating a vehicle Specifications Table of Contents Introduction AccessoriesModel Transducers ModelBracket InstallationPower Connections NMEA/DGPS NMEA/DGPS WiringSpeed/Temperature Connections Accessory ConnectionsSonar Connector Temperature and Speed/Temperature Installation ExamplesMMC Keyboard Pages Full Sonar ChartSplit Zoom Sonar Chart Menus Sonar Options SensitivityAutomatic Sensitivity Range Automatic ColorlineRange Upper and Lower Limits Range ManualChart Speed Stop ChartZoom Depth CursorSonar Features Chart DataTransducer Frequency Surface ClarityNoise Rejection Fish Depths Sonar Features Fish SymbolsLOG Sonar Chart Data Audio AlarmsZone Alarm Depth AlarmsFish Alarm Sonar SetupTransducer Type Reset Water Distance Keel OffsetCalibrate Speed System Setup Sonar SimulatorUnits of Measure Communications Ports Set Local TimeConfigure Dgps Configure NmeaReset Options Hide GPS features Popup HelpSoftware Information Introduction to GPS GPS OperationNever use this GPS receiver while operating a vehicle Finding Your Position Auto SearchManual Initialization Position Aquisition Require Dgps GPS Operation PagesStatus Navigation Customizing the Status ScreenMap Customizing the Navigation ScreenPage Cursor Map Orientation Cursor DistanceNORTH-UP Auto Zoom Range Rings/Grid LinesMap Data Icons Map Categories DrawnPlot Trail Navigate a Trail Edit TrailPage Trail Options New TrailDelete All Trails Saving the Cursor Position as a Waypoint WaypointsSaving a New Position Waypoint Information Average PositionWaypoint Navigation MAN Overboard Routes Cancel NavigationCreate a Route Page GPS Simulator Follow a RouteCoordinate System GPS SetupMap Fix Datum Position Pinning Important Alarm Notes Trip Calculator Timers/Alarm ClockUnit freezes, locks up, or operates erratically Unit won’t turn onNo fish arches when the Fish ID feature is off Noise Lowrance ELECTRONICS, INC Full ONE-YEAR Warranty Datums Datums Datums Lowrance Databases License Agreement Databases Limited Warranty Page Transferring GPS Data to/from a MMC How to Obtain Service How to Obtain Service U.S.A. Only