Required accessories and tools
Supplied accessories | Tools |
–Installation instructions
–Operating instructions
–Installation kit
Optional accessories
Installation accessories for
For permanent connection of two individual appliances, e.g. Freezer next to Refrigerator.
Lateral additional heating
If the gap between the appliances is less than 6" (160 mm).
Connecting element for furniture doors
For connection of two door panels (see explanation in Section “4. Preparing the furniture doors”). Can be used for standard height door panels without further preliminary work.
Miscellaneous
–Stepladder
–Dolly, hand truck
–Hammer drill for drilling holes in wall or floor
–Bits according suitable for material and in different sizes
–Wooden beam (cross section min. 3" x 4") as an alternative tip protection, length according to the width of the installation niche
–Wooden screws in different sizes
–Thin plywood sheet, particle board or cardboard to protect the floor from damage
–Suitable material for covering and protecting furniture (e.g. protective sheets)
–Adhesive tape
Note:
Before using, check whether the removed adhesive tape leaves adhesive residue on the work surfaces! Otherwise do not use on
Cordless screwdriver
T20
T20 Torx screwdriver
5/16" (8 mm) socket wrench
Various size drills
Open end wrench 1/2" (SW 13 mm)
Multigrip pliers
Adjustable wrench
Cutter with adjustable blade
Metal tape measure, folding ruler
Square
2' (60 cm) and 4' (1 ,2 m) spirit levels
Level, min. 4' (1 ,2 m) long
10
