1.Attaching the toe kick panel
Note:
Risk of damage to the appliance. Do not cover ventilation openings in the base panel.
Nominal dimensions to be observed:
1.Where necessary, cut the base strip to the required length.
2.Place base panel on the appliance (do not screw on).
3.Take the protective film off from the adhesive pads on the Velcro strip.
4.Put the base strip onto the base panel and push firmly.
5.Base strip can be screwed to the base panel from behind. There are holes in the base panel for this purpose.
2.Aligning the base panel
1.Place base panel on the appliance (do not screw on).
2.Measure the difference in depth A between the base panel and the base strip of the adjacent lower cabinets.
3.Remove the base panel again.
4.Adjust the brackets (a) to the dimensions A and tighten.
5.Fasten the base panel.
19