1.Pushing the appliance into the installation niche
ãCAUTION
Caution when pushing the appliance into the installation niche. Do not damage the water line or power cord.
Note:
When the floor or the appliance is not leveled in comparison to the installation niche adjust height adjustable wheels before you move the appliance into the installation niche.
1.Remove the base panel.
2.Raise the
3.Put the electric plug into the socket.
4.Push the water line into the guard tube (a) at the rear of the appliance.
ãWARNING
The appliance may tilt when the water connection line is inserted into the protective pipe (a)!
5.Prevent the power cord from becoming caught.
Tie a piece of string to the middle of the power cord and feed forwards over the top of the appliance. When pushing in the appliance, pull the cable upwards. Take care not to pinch the power cord. or
Using adhesive tape, tape the power cord to the floor centrally behind the appliance approx. 15" (380 mm) away from the rear panel of the installation niche.
6.Carefully push the appliance into the installation niche.
7.Remove edge protection (if attached).
15
