2.Slide the covering strips on the longitudinal side into the gap between the furniture door (a) and the glass pane (b).
3.Cut the covering strips of the shortest sides to the required length.
4.Push cover strips into the gap between the furniture door (a) and glass pane (b).
Adjusting the door opening angle
Depending on the installation situation, it may be necessary to adjust the door opening angle. A door opening angle of 115° has been set at the factory.
To adjust the door opening angle to 90°:
1.Open door to 90°.
Insert the banking pin through the boreholes which are now vertically aligned and drive in with a hammer.
35
