2.Use a Torx screwdriver to align the depth of the ice and water dispenser on the setting screws.
Use a ruler as positioning aid.
3.By moving by hand align the ice and water dispenser exactly lateral and in the higth to ensure that the gap is exactly the same all the way around.
6.Slide in the covering frame and push firmly.
7.Insert the covers.
8.Insert the water capture bowl.
4.Retighten the nuts on the setting screws to fix the adjustment.
5.Slide in the covering frame provisionally to check the adjustment.
The lateral spacing around the ice and water dispenser must be exactly the same. Correct if necessary.
Attaching covering strips
(only for the wine storage cabinet)
1.In certain circumstances, if the frame width is narrow, the side of the covering strip has to be shortened. To determine the required length of the side, lay trial pieces next to the covering strip.
34
