Pioneer DEH-2300RB Activating/Deactivating the TA Function, Tune in a TP or EON TP station

Page 13

TA Function

The TA (Traffic Announcement standby) function lets you receive traffic announcements automatically, no matter what source you are listening to. The TA function can be activat- ed for either a TP station (a station that broadcasts traffic information) or an EON TP sta- tion (a station carrying information which cross-references TP stations).

Activating/Deactivating the TA Function

1.Tune in a TP or EON TP station.

The “TP” indicator lights when the tuner is tuned to a TP station or an EON TP station.

2.Activate the TA function.

“TA”

The “TA” indicator lights, indicating that the tuner is waiting for traffic announcements. Repeat the preceding operation when no traffic announcement is being received to deacti- vate the TA function.

Note:

•The system switches back to the original source following traffic announcement reception.

•The TA function can be activated from sources other than tuner if the tuner was last set to the FM band but not if it was last set to the MW/LW band.

•If the tuner was last set to FM, turning on the TA function lets you operate other tuning functions while listening to sources other than tuner.

•Only TP or EON TP stations are tuned in during the Seek Tuning mode when the “TA” indicator is ON.

•Only TP or EON TP stations are stored by BSM when the “TA” indicator is ON.

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

12

Image 13

Contents DEH-2330R DEH-2300R DEH-2300RB DEH-1330R DEH-1300R Contents Head Unit Key FinderAbout This Product Before Using This ProductAbout This Manual Case of Trouble PrecautionBasic Operation Raise or lower the volume Turn the source OFFTo Listen to Music Select the desired source e.g. TunerFrequency Indicator Band Indicator Manual and Seek TuningPreset Tuning Basic Operation of TunerBasic Operation of Built-in CD Player Track Number IndicatorCD Loading Slot EjectSwitch the Local ON/OFF with the LOCAL/BSM button Local Seek TuningPress the LOCAL/BSM but Ton for 2 seconds to switch Tuner OperationWhat is RDS? Using RDS FunctionsProgram Service Name Display PTY InformationAF Function AF is set to on by defaultActivating/Deactivating the AF Function Turn AF to OFFPI Seek Function Auto PI Seek for preset stationRegional Function PI SeekActivating/Deactivating the TA Function TA FunctionTune in a TP or EON TP station Activate the TA functionAdjusting the TA Volume Canceling Traffic AnnouncementsTP Alarm Function Social PTY FunctionEnter the PTY Search setting mode PTY Search Setting FunctionName of a program type appears on the display for 5 seconds Canceling Emergency Announcements PTY AlarmPTY Search Function Initiate a PTY searchRepeat Play Using the Built-in CD PlayerRandom Play Scan PlaySelecting the Equalizer Curve Audio AdjustmentEntering the Audio Menu Adjust left/right speaker bal- ance with the 2/3 buttons Balance Adjustment FADAudio Menu features the following functions Audio Menu FunctionsLoudness Adjustment Loud Equalizer Curve Adjustment EQ-L/EQ-M/EQ-HBoost or attenuate the selected band with the 5/∞ buttons Select the desired level with the 2/3 buttonsFront Image Enhancer Function FIE Source Level Adjustment SLA100 += 160 += 250 Hz Display shows +4Theft Protection Detaching and Replacing the Front PanelDetaching the Front Panel Replacing the Front PanelEntering the Initial Setting Menu Initial SettingSwitch the source OFF Enter the Initial Setting Menu Select a desired modeChanging the FM Tuning Step Step Initial Setting Menu FunctionsSwitching the Auto PI Seek A-PI Initial Setting Menu features the following functionsCellular Telephone Muting Other FunctionsCD Player and Care Message Possible cause Recommended action Built-in CD Player’s Error MessageSpecifications Pioneer Corporation