Pioneer DEH-2300RB Built-in CD Player’s Error Message, Message Possible cause Recommended action

Page 28

CD Player and Care

Built-in CD Player’s Error Message

When problems occur with CD playback, an error message appears on the display. Refer to the table below to identify the problem, then take the suggested corrective action. If the error persists, contact your dealer or your nearest PIONEER Service Center.

Message	Possible cause	Recommended action
ERROR- 11, 12, 17, 30	Dirty disc.	Clean the disc.

ERROR- 11, 12, 17, 30	Scratched disc.	Replace the disc.

ERROR- 14	Unrecorded CD.	Check the disc.

ERROR- 10, 11, 12, 14,	Electrical or mechanical	Turn the ignition ON and OFF, or
17, 30, A0	problem.	switch to a different source, then back
		to the CD player.

HEAT	CD player overheating.	Discontinue play until the machine
		temperature drops.

Image 28

Contents DEH-2330R DEH-2300R DEH-2300RB DEH-1330R DEH-1300R Contents Key Finder Head UnitAbout This Product Before Using This ProductAbout This Manual Precaution Case of TroubleRaise or lower the volume Turn the source OFF Basic OperationTo Listen to Music Select the desired source e.g. TunerManual and Seek Tuning Frequency Indicator Band IndicatorPreset Tuning Basic Operation of TunerTrack Number Indicator Basic Operation of Built-in CD PlayerCD Loading Slot EjectLocal Seek Tuning Switch the Local ON/OFF with the LOCAL/BSM buttonPress the LOCAL/BSM but Ton for 2 seconds to switch Tuner OperationUsing RDS Functions What is RDS?Program Service Name Display PTY InformationAF is set to on by default AF FunctionActivating/Deactivating the AF Function Turn AF to OFFAuto PI Seek for preset station PI Seek FunctionRegional Function PI SeekTA Function Activating/Deactivating the TA FunctionTune in a TP or EON TP station Activate the TA functionAdjusting the TA Volume Canceling Traffic AnnouncementsTP Alarm Function PTY Function SocialEnter the PTY Search setting mode PTY Search Setting FunctionName of a program type appears on the display for 5 seconds PTY Alarm Canceling Emergency AnnouncementsPTY Search Function Initiate a PTY searchUsing the Built-in CD Player Repeat PlayRandom Play Scan PlaySelecting the Equalizer Curve Audio AdjustmentEntering the Audio Menu Balance Adjustment FAD Adjust left/right speaker bal- ance with the 2/3 buttonsAudio Menu features the following functions Audio Menu FunctionsEqualizer Curve Adjustment EQ-L/EQ-M/EQ-H Loudness Adjustment LoudBoost or attenuate the selected band with the 5/∞ buttons Select the desired level with the 2/3 buttonsSource Level Adjustment SLA Front Image Enhancer Function FIE100 += 160 += 250 Hz Display shows +4Detaching and Replacing the Front Panel Theft ProtectionDetaching the Front Panel Replacing the Front PanelInitial Setting Entering the Initial Setting MenuSwitch the source OFF Enter the Initial Setting Menu Select a desired modeInitial Setting Menu Functions Changing the FM Tuning Step StepSwitching the Auto PI Seek A-PI Initial Setting Menu features the following functionsOther Functions Cellular Telephone MutingCD Player and Care Built-in CD Player’s Error Message Message Possible cause Recommended actionSpecifications Pioneer Corporation

CD Player and Care

Built-in CD Player’s Error Message

Message

Possible cause

Recommended action

ERROR- 14