Pioneer DEH-1330R, DEH-1300R Equalizer Curve Adjustment EQ-L/EQ-M/EQ-H, Loudness Adjustment Loud

Page 21

Equalizer Curve Adjustment (EQ-L/EQ-M/EQ-H)

You can adjust the currently selected equalizer curve settings as desired. Adjusted equalizer curve settings are memorized in “CUSTOM”.

1.Press the AUDIO button and select the Equalizer mode (EQ-L/EQ-M/EQ-H) in the Audio Menu.

2.Select the band you want to

adjust with the 2/3 buttons.

EQ-L (low) += EQ-M (mid) += EQ-H (high)

3. Boost or attenuate the selected band with the 5/∞ buttons.

The display shows “+6” – “–6”.

“CUSTOM”

Note:

•If you make adjustments when a curve other than “CUSTOM” is selected, the newly adjusted curve will replace the previous adjusted curve. Then a new curve with “CUSTOM” appears on the display while selecting the equalizer curve. (Refer to page 18.)

Loudness Adjustment (LOUD)

The Loudness function compensates for deficiencies in the low and high sound ranges at low volume. You can select a desired Loudness level.

1.Press the AUDIO button and select the Loudness mode (LOUD) in the Audio Menu.

2.Switch the Loudness function

ON/OFF with the 5/∞ but- tons.

“LOUD ”

3. Select the desired level with the 2/3 buttons.

LOW (low) += MID (mid) += HI (high)

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

20

Image 21

Contents DEH-2330R DEH-2300R DEH-2300RB DEH-1330R DEH-1300R Contents Head Unit Key FinderBefore Using This Product About This ProductAbout This Manual Case of Trouble PrecautionBasic Operation Raise or lower the volume Turn the source OFFTo Listen to Music Select the desired source e.g. TunerFrequency Indicator Band Indicator Manual and Seek TuningPreset Tuning Basic Operation of TunerBasic Operation of Built-in CD Player Track Number IndicatorCD Loading Slot EjectSwitch the Local ON/OFF with the LOCAL/BSM button Local Seek TuningPress the LOCAL/BSM but Ton for 2 seconds to switch Tuner OperationWhat is RDS? Using RDS FunctionsProgram Service Name Display PTY InformationAF Function AF is set to on by defaultActivating/Deactivating the AF Function Turn AF to OFFPI Seek Function Auto PI Seek for preset stationRegional Function PI SeekActivating/Deactivating the TA Function TA FunctionTune in a TP or EON TP station Activate the TA functionCanceling Traffic Announcements Adjusting the TA VolumeTP Alarm Function Social PTY FunctionPTY Search Setting Function Enter the PTY Search setting modeName of a program type appears on the display for 5 seconds Canceling Emergency Announcements PTY AlarmPTY Search Function Initiate a PTY searchRepeat Play Using the Built-in CD PlayerRandom Play Scan PlayAudio Adjustment Selecting the Equalizer CurveEntering the Audio Menu Adjust left/right speaker bal- ance with the 2/3 buttons Balance Adjustment FADAudio Menu features the following functions Audio Menu FunctionsLoudness Adjustment Loud Equalizer Curve Adjustment EQ-L/EQ-M/EQ-HBoost or attenuate the selected band with the 5/∞ buttons Select the desired level with the 2/3 buttonsFront Image Enhancer Function FIE Source Level Adjustment SLA100 += 160 += 250 Hz Display shows +4Theft Protection Detaching and Replacing the Front PanelDetaching the Front Panel Replacing the Front PanelEntering the Initial Setting Menu Initial SettingSwitch the source OFF Enter the Initial Setting Menu Select a desired modeChanging the FM Tuning Step Step Initial Setting Menu FunctionsSwitching the Auto PI Seek A-PI Initial Setting Menu features the following functionsCellular Telephone Muting Other FunctionsCD Player and Care Message Possible cause Recommended action Built-in CD Player’s Error MessageSpecifications Pioneer Corporation