Pioneer DEH-2300RB, DEH-1300R Basic Operation of Built-in CD Player, CD Loading Slot, Eject

Page 8

Basic Operation

Basic Operation of Built-in CD Player

CD Loading Slot

Note:

The built-in CD player plays one standard 12 cm or 8 cm (single) CD at a time. Do not use an adapter when playing 8 cm CD.

Don’t insert any materials except for CD into CD loading slot.

Eject

Note:

The CD function can be turned ON/OFF with the disc remaining in this product. (Refer to page 5.)

A disc left partially inserted after ejec- tion may incur damage or fall out.

Track Number Indicator

Play Time Indicator

Track Search and Fast Forward/Reverse

You can select between Track Search or Fast Forward/Reverse by pressing the 2/3 button for a different length of time.

Track Search

0.5 seconds or less

Fast Forward/Reverse

Continue pressing

Note:

If a disc cannot be inserted fully or playback fails, make sure the recorded side is down. Push the EJECT button and check the disc for damage before reinserting it.

If a disc is inserted with the recorded side up, it will be ejected automatically after a few moments.

If the built-in CD player cannot operate properly, an error message (such as “ERROR-14”) appears on the display. Refer to “Built-in CD Player’s Error Message” on page 27.

7

Image 8
Contents DEH-2330R DEH-2300R DEH-2300RB DEH-1330R DEH-1300R Contents Key Finder Head UnitAbout This Manual Before Using This ProductAbout This Product Precaution Case of TroubleRaise or lower the volume Turn the source OFF Basic OperationTo Listen to Music Select the desired source e.g. TunerManual and Seek Tuning Frequency Indicator Band IndicatorPreset Tuning Basic Operation of TunerTrack Number Indicator Basic Operation of Built-in CD PlayerCD Loading Slot EjectLocal Seek Tuning Switch the Local ON/OFF with the LOCAL/BSM buttonPress the LOCAL/BSM but Ton for 2 seconds to switch Tuner OperationUsing RDS Functions What is RDS?Program Service Name Display PTY InformationAF is set to on by default AF FunctionActivating/Deactivating the AF Function Turn AF to OFFAuto PI Seek for preset station PI Seek FunctionRegional Function PI SeekTA Function Activating/Deactivating the TA FunctionTune in a TP or EON TP station Activate the TA functionTP Alarm Function Canceling Traffic AnnouncementsAdjusting the TA Volume PTY Function SocialName of a program type appears on the display for 5 seconds PTY Search Setting FunctionEnter the PTY Search setting mode PTY Alarm Canceling Emergency AnnouncementsPTY Search Function Initiate a PTY searchUsing the Built-in CD Player Repeat PlayRandom Play Scan PlayEntering the Audio Menu Audio AdjustmentSelecting the Equalizer Curve Balance Adjustment FAD Adjust left/right speaker bal- ance with the 2/3 buttonsAudio Menu features the following functions Audio Menu FunctionsEqualizer Curve Adjustment EQ-L/EQ-M/EQ-H Loudness Adjustment LoudBoost or attenuate the selected band with the 5/∞ buttons Select the desired level with the 2/3 buttonsSource Level Adjustment SLA Front Image Enhancer Function FIE100 += 160 += 250 Hz Display shows +4Detaching and Replacing the Front Panel Theft ProtectionDetaching the Front Panel Replacing the Front PanelInitial Setting Entering the Initial Setting MenuSwitch the source OFF Enter the Initial Setting Menu Select a desired modeInitial Setting Menu Functions Changing the FM Tuning Step StepSwitching the Auto PI Seek A-PI Initial Setting Menu features the following functionsOther Functions Cellular Telephone MutingCD Player and Care Built-in CD Player’s Error Message Message Possible cause Recommended actionSpecifications Pioneer Corporation