Pioneer DEH-1330R, DEH-1300R Activating/Deactivating the AF Function, Turn AF to OFF

Page 11

AF Function

The AF (Alternative Frequencies search) function is used to search for other frequencies in the same network as the currently tuned station. It automatically retunes the receiver to another frequency in the network which is broadcasting a stronger signal when there are problems with reception of the currently tuned station or better reception is possible on

a different frequency.

Note:

•AF tunes the receiver only to RDS stations when you use Seek tuning or BSM Auto Memory with the “AF ” indicator ON.

•When you recall a preset station, the tuner may update the preset station with a new frequency from the station’s AF list. (This is only available when using presets on the FM1 band.) No preset num- ber appears on the display if the RDS data for the station received differs from that for the original- ly stored station.

•Sound may be temporarily interrupted by another program during an AF frequency search.

•When the tuner is tuned to a non-RDS station, the “AF ” indicator flashes.

•AF can be switched ON or OFF independently for each FM band.

Activating/Deactivating the AF Function

AF is set to ON by default.

• Turn AF to OFF.

Hold for 2 seconds

“AF ” disappears

To turn AF back ON, repeat the preceding operation.

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

10

Image 11

Contents DEH-2330R DEH-2300R DEH-2300RB DEH-1330R DEH-1300R Contents Head Unit Key FinderAbout This Manual Before Using This ProductAbout This Product Case of Trouble PrecautionSelect the desired source e.g. Tuner Raise or lower the volume Turn the source OFFBasic Operation To Listen to MusicBasic Operation of Tuner Manual and Seek TuningFrequency Indicator Band Indicator Preset TuningEject Track Number IndicatorBasic Operation of Built-in CD Player CD Loading SlotTuner Operation Local Seek TuningSwitch the Local ON/OFF with the LOCAL/BSM button Press the LOCAL/BSM but Ton for 2 seconds to switchPTY Information Using RDS FunctionsWhat is RDS? Program Service Name DisplayTurn AF to OFF AF is set to on by defaultAF Function Activating/Deactivating the AF FunctionPI Seek Auto PI Seek for preset stationPI Seek Function Regional FunctionActivate the TA function TA FunctionActivating/Deactivating the TA Function Tune in a TP or EON TP stationTP Alarm Function Canceling Traffic AnnouncementsAdjusting the TA Volume Social PTY FunctionName of a program type appears on the display for 5 seconds PTY Search Setting FunctionEnter the PTY Search setting mode Initiate a PTY search PTY AlarmCanceling Emergency Announcements PTY Search FunctionScan Play Using the Built-in CD PlayerRepeat Play Random PlayEntering the Audio Menu Audio AdjustmentSelecting the Equalizer Curve Audio Menu Functions Balance Adjustment FADAdjust left/right speaker bal- ance with the 2/3 buttons Audio Menu features the following functionsSelect the desired level with the 2/3 buttons Equalizer Curve Adjustment EQ-L/EQ-M/EQ-HLoudness Adjustment Loud Boost or attenuate the selected band with the 5/∞ buttonsDisplay shows +4 Source Level Adjustment SLAFront Image Enhancer Function FIE 100 += 160 += 250 HzReplacing the Front Panel Detaching and Replacing the Front PanelTheft Protection Detaching the Front PanelSelect a desired mode Initial SettingEntering the Initial Setting Menu Switch the source OFF Enter the Initial Setting MenuInitial Setting Menu features the following functions Initial Setting Menu FunctionsChanging the FM Tuning Step Step Switching the Auto PI Seek A-PICellular Telephone Muting Other FunctionsCD Player and Care Message Possible cause Recommended action Built-in CD Player’s Error MessageSpecifications Pioneer Corporation