Standard Horizon CP180 owner manual Battery Connections, Nmea Connections

Page 19

NOTE

Port 2 Input and Output is used by the optional FF520. In the diagram above you will notice Port 2 Input and Output wires are shown in gray and not used.

Port 4, and 5 Outputs are can be connected to NMEA devices capable of listening to NMEA 0183 sentences.

Port 4, and 5 Inputs can be connected to NMEA devices capable of outputting to NMEA 0183 sentences.

The Input and Output baud rate for each port are set using the Advanced Setup>In/Out Connections menu. For example if Port 1 is set for AIS 38400, the Input and Output both operate at 38400 baud.

AIS Setup

TheCP300orCP300ihastobesetuptobeabletoreceiveNMEAinformationfromtheAISreceiver. 1. Press [Menu], move the ShuttlePoint knob to highlight SETUP MENU and press [ENT].

2. Move the ShuttlePoint knob to highlight ADVANCED SETUP and press [ENT] or move the ShuttlePoint knob to the right.

3. Move the ShuttlePoint knob to highlight IN/OUT CONNECTIONS and press [ENT] or move the ShuttlePoint knob to the right.

4. Move the ShuttlePoint knob to highlight PORT 4 INPUT and press [ENT] or move the ShuttlePoint knob to the right.

5. Move the ShuttlePoint knob up/down to select AIS 38400 and press [ENT] or move the ShuttlePoint knob to the right.

2.5BATTERY CONNECTIONS

1.The GPS Chart Plotters are supplied with a fuse and holder. This fuse should be installed into the Black wire to protect the NMEA Output/Input circuits from becoming damaged.

2.Connect the Red and Black wires from the GPS Chart Plotter to a 12VDC source directly as possible.

2.6NMEA CONNECTIONS

The GPS Chart Plotter can be connected to external devices with NMEA and display information, examples:

GPS Chart Plotters

Page 21

Image 19
Contents CP180/CP180i CP300/CP300i FCC Compliance Statement Cleaning Procedure for the GPS Chart Plotter Screen GPS Chart Plotters Table of Contents 10.0.0 Fonts & Symbols on the CP300/CP300iEditing a Mark 10.012.3 17.0.0 RAM Menu reset 17.0.1 DIM Menu 17.0.2Customizing the Data Windows 12.1 12.2GPS Chart Plotters General Information IntroductionPacking List 1 CP300/CP300i Packing List Optional Accessories0 CP300/CP300i Optional Accessories 0 CP180/CP180i Packing ListGetting Started Mounting the GPS Chart PlotterBracket Mounting Mounting the CP180 or the CP300 External GPS Antenna CP180 and CP300 Flush MountingFlush mounting the antenna 0 Installing the GPS Waas Smart AntennaPin 12VDC Power and Nmea PWR & ACC 1 CableConnections Connection Table For CP180/CP180iConnection Table For CP300/CP300i Wire Color DescriptionSmart GPS Cable for CP180 and CP300 Nmea ACC 2 Cable Video ConnectorDC Power Connection Connection For CP180/CP180iConnection of the FF520, AIS receiver, VHF and Autopilot AIS SetupConnection For CP300/CP300i Nmea Connections Battery ConnectionsOther DSC VHF Manufactures GPS Position on a VHF RadioOptional Black BOX Fish Finder Outputting Nmea to a Personal ComputerVCR or DVD Input Nmea Data11 CP300/CP300i Video Input Video Camera InputII. Quick Activation by pressing CLR for 1 second From the menuIII. Quick Activation by Soft Keys Demo Mode for Dealer USE GPS Chart Plotters Controls and Connections Controls and IndicatorsCP300/CP300i Soft Keys Power On, Off and ShuttlePoint knob operationGetting Started Cursor Mode Cursor Vs. Home ModeHome mode Changing the Ships Icon Cursor and Menu selection speedCursor may be changed to any of the following Selecting North Up or Course Up Changing the backlight and contrastAdjusting Time Adjusting the TimeSelecting Loran TD or Other Coordinate System Changing the Chart ColorCustomizing the Soft Keys on CP300/CP300i Selecting Pages Using Soft Keys on CP300/CP300iTime Setup Other Settings in General Setup MenuCursor Speed InformationPort Services Using Find Services & More FunctionOther Available Searches Following is an example of Full Info on Lakes Info on LakesQuick Info On Lakes Full Info On Lakes1a Example of picture associated to the Fishing object GPS Chart Plotters Inserting the C-CARD New Data FeaturesNew Presentation Features MAP MAX OverviewMAX and NT/NT+ C-CARD coexistence Zoom Type Fonts & Symbols on the CP300/CP300iMAP Functions MAX Functions MenuDynamic Nav-Aids Perspective ViewZoom Boxes definition is as followsCurrents Prediction Pictures & Diagrams6 Pictures and Diagrams How to show the pictures or diagrams of a Multimedia ObjectEnhanced Port Info Only for CP180/180i Creating a NEW Mark Using the ChartCreating Marks Editing a MarkMoving a Mark or Waypoint Deleting a Mark or WaypointFind MARKS/WAYPOINTS ListGoto Cursor Creating a NEW Mark with the User Points List4a Navigating to Cursor Example Goto MarkGPS Chart Plotters Deleting a MOB Point MAN Over Board MOB FunctionGPS Chart Plotters Routes Creating a Route Using WaypointsWhen finished press ENT to save Press CLR to show the Chart Creating a Route Using Marks on the ChartMaking Additional Routes By select Route Other Settings in Route MenuInserting a Waypoint Into a Route Goto a RouteGPS Chart Plotters Tracking TracksENT Other Settings in Track MenuUsing the Trip LOG Saving and starting a new TrackResetting the Trip Log GPS Chart Plotters Transferring files to the optional User C-CARD User C-CARDUser C-CARD Menu Formatting the User C-CARDDeleting a file from the User C-CARD Loading a fileRefreshing the User C-CARD Selection by Soft KEY only for CP300/CP300i PagesPages can selected in the following way Selection by MenuWindow Selections ChartDisplay Mode Additional Functions on ChartTurning Off Information on Icon Points To control the display on the map of the marine features Marine SettingsUnderwater Objects Settings Depth SettingsLand Settings Chart SettingsCustomizing the Data Windows Customizing Chart SettingsNavigation Compass Tape Fix position HighwayFix position Time Speed Over Ground Course Over Ground Compass RoseChanging to and from Daylight Savings time CelestialGPS Status Changing dateChanging the Nmea page Windows Nmea DisplayVHF Digital Selective Calling Nmea DEPTH, Wind SPEED, Temp and SOG Trend PagesInterfacing Position Request DSC Distress CallGPS Chart Plotters INPUT/OUTPUT Nmea Advanced SettingsNavigate Compass AlarmsGrounding Alarm GPS Chart Plotters AIS System Definitions AISAIS Menu To SET the Chart Plotter for Receiving AISFunctions are described in the following table Vessel Name Mmsi number Radio Call Sign SOG Quick Info on AIS TargetCPA and Tcpa values GPS Chart Plotters MAP Weather Service Menu MAP Weather ServiceDownload Type of Data Copy From User C-CARDWeather Forecast Real Time ViewTrouble Shooting GPS Chart Plotters DIM Menu RAM Menu resetTechnical Tests System TestSerial Ports Cartridges520mA max @12V Specifications18.0 CP180/CP180i Specifications Power Consumption CPStorage temperature 18.1 CP300/CP300i SpecificationsPower supply Operating temperature rangeGPS Waas Smart Receiver Specifications GPS Chart Plotters Appendix Terms Page Analitycal Index Greenwich England Mean Time Home Mode 27, 28Power and Nmea Cable GPS StatusWaypoint 28, 49 GPS Chart Plotters Track Points 61, 93Route 28, 49, 93 User Points 37, 93Please Note
Related manuals
Manual 92 pages 12 b Manual 42 pages 55.96 Kb

CP180 specifications

Standard Horizon is well known for its innovative marine electronics, particularly its line of chart plotters and multifunction displays. Among its popular products are the CPV550, CP500, CP180I, CP180, and CP300 models, each designed to enhance navigational experience for boaters and sailors.

The Standard Horizon CPV550 is a cutting-edge chart plotter that features a bright, high-resolution 5.5-inch color display. This model supports Navionics and C-MAP charts, ensuring users have access to high-quality cartography. Its built-in GPS receiver offers exceptional accuracy and fast position fixes, while its user-friendly interface allows for easy navigation through menus and functions. The CPV550 is equipped with a variety of connectivity options, including NMEA 0183, allowing for seamless integration with other onboard electronics.

The CP500 is another robust option, featuring a 5-inch display and advanced GPS technology. This model is designed for ease of use, with a straightforward interface that appeals to both novice and experienced users. It offers real-time tracking and position monitoring, making it ideal for coastal cruising and fishing. The CP500 supports various cartography formats, providing flexibility for users who prefer different map sources.

Moving on, the CP180I model stands out with its innovative integrated design, packing a 7-inch display and multiple advanced features into a compact unit. It includes built-in Wi-Fi, allowing users to connect their mobile devices and access updates or weather information directly from the display. The CP180I is also compatible with a wide range of NMEA 2000 devices, offering greater customization options for boaters looking to expand their electronic setups.

The CP180 offers similar capabilities but focuses on a slightly larger 8-inch screen. This model enhances visibility and provides an intuitive experience with its touch-screen interface. It supports various navigation modes and features such as AIS overlay and radar integration, which significantly improve situational awareness on the water.

Finally, the Standard Horizon CP300 is a versatile chart plotter that combines advanced features with exceptional user-friendliness. This model features a 9-inch display that offers crisp visuals and enhanced readability even in bright sunlight. It also stands out for its robust integration capabilities with other marine instruments. The CP300 includes built-in Bluetooth and Wi-Fi, allowing for wireless data sharing and connectivity with smart devices.

Overall, the Standard Horizon line of chart plotters, including the CPV550, CP500, CP180I, CP180, and CP300, offers advanced technological features, reliable performance, and user-friendly interfaces, making them excellent choices for both leisure and professional mariners alike. With a focus on connectivity, visibility, and customizable options, these devices enhance the navigation experience on the water.