Standard Horizon CP180 owner manual

Page 96

Position Request – Marine DSC VHF Function of transmitting a GPS position to another Marine DSC VHF. When GPS Chart Plotter is connected to STANDARD HORIZON GPS the position of another vessel is shown on the Chart page.

SPEED – Shows the Speed Thru the Water when a Digital Speed Log is connected. SOG (Speed Over Ground) – The speed you vessel is travelling at.

STEER – Heading to steer to destination Waypoint. TIME – Shows the current time received by the GPS.

TRIP LOG – Shows the distance the vessel has travelled since the trip log was reset. TRU Wind DIR SPD (Apparent Wind Direction) – Shows the True Wind Direction when a external wind instrument with NMEA is connected.

TRU Wind SPD (Apparent Wind Speed) – Shows the True Wind Speed when a external wind instrument with NMEA is connected.

TTG (Time To Go) – Shows time to go to reach a Destination point. UNITS Nm Nautical Mile (1 NM = 1.15 Sm or 1.85Km)

Sm Statue Mile (1Sm = 0.87Nm or 1.61Km)

Km Kilometer (1 Kilometer = 0062 Sm or 0.54Nm)

FT Feet. (1 Foot = 0.167 Fathoms or 0.305 Meters)

FA Fathom (1 Fathom = 6 Feet or 1.83 Meters)

Mt Meter (1 Meter = 3.28 Feet or 0.55 Fathoms)

Kts Knot (1 Knot = 1.15 MPH or 1.85 KPH)

MPH Miles Per Hour (1 MPH = 0.87 Knots or 1.61 KPH)

Kmh Kilometer Per Hour (1 KPH = 0.54 Knots or 0.62 MPH)

VMG – It is the destination closing Velocity. The VMG is calculated using the current speed of the vessel (SOG) and the difference between the current vessel course and the bearing to the Destination.

WAAS 2D/3D – The GPS is receiving a 2D or 3D position and the correction from the WAAS Satellite. WAAS consists of approximately 25 ground reference stations positioned across the United States that monitor GPS satellite data. Two master stations, located on either coast, collect data from the reference stations and create a GPS correction message. This correction accounts for GPS satellite orbit and clock drift plus signal delays caused by the atmosphere and ionosphere. The corrected differential message is then broadcast through one of two geostationary satellites, or satellites with a fixed position over the equator. The information is compatible with the basic GPS signal structure, which means any WAAS- enabled GPS receiver can read the signal.

WATER TEMP – Shows the sea water temperature when the FF520 50/200kHz BLACK BOX FISH FINDER or a Digital Speed Log/Temp instrument with NMEA is connected.

XTE (Cross Track Error) – The distance your vessel is off course (left or right) to a Destination point.

Page 98

 

GPS Chart Plotters

 

 

Page 95 Page 97
Image 96
Page 95 Page 97
Contents CP180/CP180i CP300/CP300i FCC Compliance Statement Cleaning Procedure for the GPS Chart Plotter Screen GPS Chart Plotters Table of Contents Fonts & Symbols on the CP300/CP300i Editing a Mark10.0 10.0.017.0.0 RAM Menu reset 17.0.1 DIM Menu 17.0.2 Customizing the Data Windows 12.112.2 12.3GPS Chart Plotters Introduction General InformationPacking List Optional Accessories 0 CP300/CP300i Optional Accessories0 CP180/CP180i Packing List 1 CP300/CP300i Packing ListMounting the GPS Chart Plotter Getting StartedBracket Mounting CP180 and CP300 Flush Mounting Mounting the CP180 or the CP300 External GPS Antenna0 Installing the GPS Waas Smart Antenna Flush mounting the antenna12VDC Power and Nmea PWR & ACC 1 Cable ConnectionsConnection Table For CP180/CP180i PinWire Color Description Connection Table For CP300/CP300iSmart GPS Cable for CP180 and CP300 Video Connector DC Power ConnectionConnection For CP180/CP180i Nmea ACC 2 CableAIS Setup Connection of the FF520, AIS receiver, VHF and AutopilotConnection For CP300/CP300i Battery Connections Nmea ConnectionsGPS Position on a VHF Radio Optional Black BOX Fish FinderOutputting Nmea to a Personal Computer Other DSC VHF ManufacturesNmea Data 11 CP300/CP300i Video InputVideo Camera Input VCR or DVD InputFrom the menu II. Quick Activation by pressing CLR for 1 secondIII. Quick Activation by Soft Keys Demo Mode for Dealer USE GPS Chart Plotters Controls and Indicators Controls and ConnectionsPower On, Off and ShuttlePoint knob operation CP300/CP300i Soft KeysGetting Started Cursor Vs. Home Mode Cursor ModeHome mode Cursor and Menu selection speed Changing the Ships IconCursor may be changed to any of the following Changing the backlight and contrast Selecting North Up or Course UpAdjusting the Time Adjusting TimeChanging the Chart Color Selecting Loran TD or Other Coordinate SystemSelecting Pages Using Soft Keys on CP300/CP300i Customizing the Soft Keys on CP300/CP300iOther Settings in General Setup Menu Time SetupInformation Cursor SpeedUsing Find Services & More Function Port ServicesOther Available Searches Info on Lakes Quick Info On LakesFull Info On Lakes Following is an example of Full Info on Lakes1a Example of picture associated to the Fishing object GPS Chart Plotters New Data Features New Presentation FeaturesMAP MAX Overview Inserting the C-CARDMAX and NT/NT+ C-CARD coexistence Fonts & Symbols on the CP300/CP300i MAP FunctionsMAX Functions Menu Zoom TypePerspective View Dynamic Nav-AidsBoxes definition is as follows ZoomPictures & Diagrams Currents PredictionHow to show the pictures or diagrams of a Multimedia Object 6 Pictures and DiagramsEnhanced Port Info Creating a NEW Mark Using the Chart Creating MarksEditing a Mark Only for CP180/180iDeleting a Mark or Waypoint Moving a Mark or WaypointMARKS/WAYPOINTS List FindCreating a NEW Mark with the User Points List Goto CursorGoto Mark 4a Navigating to Cursor ExampleGPS Chart Plotters MAN Over Board MOB Function Deleting a MOB PointGPS Chart Plotters Creating a Route Using Waypoints RoutesCreating a Route Using Marks on the Chart When finished press ENT to save Press CLR to show the ChartMaking Additional Routes Other Settings in Route Menu Inserting a Waypoint Into a RouteGoto a Route By select RouteGPS Chart Plotters Tracks TrackingOther Settings in Track Menu Using the Trip LOGSaving and starting a new Track ENTResetting the Trip Log GPS Chart Plotters User C-CARD User C-CARD MenuFormatting the User C-CARD Transferring files to the optional User C-CARDLoading a file Deleting a file from the User C-CARDRefreshing the User C-CARD Pages Pages can selected in the following waySelection by Menu Selection by Soft KEY only for CP300/CP300iChart Window SelectionsAdditional Functions on Chart Display ModeTurning Off Information on Icon Points Marine Settings To control the display on the map of the marine featuresDepth Settings Land SettingsChart Settings Underwater Objects SettingsCustomizing Chart Settings Customizing the Data WindowsNavigation Highway Fix position Time Speed Over Ground Course Over GroundCompass Rose Compass Tape Fix positionCelestial GPS StatusChanging date Changing to and from Daylight Savings timeNmea Display Changing the Nmea page WindowsNmea DEPTH, Wind SPEED, Temp and SOG Trend Pages VHF Digital Selective CallingInterfacing DSC Distress Call Position RequestGPS Chart Plotters Advanced Settings INPUT/OUTPUT NmeaNavigate Alarms CompassGrounding Alarm GPS Chart Plotters AIS AIS System DefinitionsTo SET the Chart Plotter for Receiving AIS AIS MenuFunctions are described in the following table Quick Info on AIS Target Vessel Name Mmsi number Radio Call Sign SOGCPA and Tcpa values GPS Chart Plotters MAP Weather Service MAP Weather Service MenuDownload Copy From User C-CARD Weather ForecastReal Time View Type of DataTrouble Shooting GPS Chart Plotters RAM Menu reset Technical TestsSystem Test DIM MenuCartridges Serial PortsSpecifications 18.0 CP180/CP180i SpecificationsPower Consumption CP 520mA max @12V18.1 CP300/CP300i Specifications Power supplyOperating temperature range Storage temperatureGPS Waas Smart Receiver Specifications GPS Chart Plotters Appendix Terms Page Analitycal Index Home Mode 27, 28 Power and Nmea CableGPS Status Greenwich England Mean TimeGPS Chart Plotters Track Points 61, 93 Route 28, 49, 93User Points 37, 93 Waypoint 28, 49Please Note
Related manuals
Manual 92 pages 12 b Manual 42 pages 55.96 Kb

CP180 specifications

Standard Horizon is well known for its innovative marine electronics, particularly its line of chart plotters and multifunction displays. Among its popular products are the CPV550, CP500, CP180I, CP180, and CP300 models, each designed to enhance navigational experience for boaters and sailors.

The Standard Horizon CPV550 is a cutting-edge chart plotter that features a bright, high-resolution 5.5-inch color display. This model supports Navionics and C-MAP charts, ensuring users have access to high-quality cartography. Its built-in GPS receiver offers exceptional accuracy and fast position fixes, while its user-friendly interface allows for easy navigation through menus and functions. The CPV550 is equipped with a variety of connectivity options, including NMEA 0183, allowing for seamless integration with other onboard electronics.

The CP500 is another robust option, featuring a 5-inch display and advanced GPS technology. This model is designed for ease of use, with a straightforward interface that appeals to both novice and experienced users. It offers real-time tracking and position monitoring, making it ideal for coastal cruising and fishing. The CP500 supports various cartography formats, providing flexibility for users who prefer different map sources.

Moving on, the CP180I model stands out with its innovative integrated design, packing a 7-inch display and multiple advanced features into a compact unit. It includes built-in Wi-Fi, allowing users to connect their mobile devices and access updates or weather information directly from the display. The CP180I is also compatible with a wide range of NMEA 2000 devices, offering greater customization options for boaters looking to expand their electronic setups.

The CP180 offers similar capabilities but focuses on a slightly larger 8-inch screen. This model enhances visibility and provides an intuitive experience with its touch-screen interface. It supports various navigation modes and features such as AIS overlay and radar integration, which significantly improve situational awareness on the water.

Finally, the Standard Horizon CP300 is a versatile chart plotter that combines advanced features with exceptional user-friendliness. This model features a 9-inch display that offers crisp visuals and enhanced readability even in bright sunlight. It also stands out for its robust integration capabilities with other marine instruments. The CP300 includes built-in Bluetooth and Wi-Fi, allowing for wireless data sharing and connectivity with smart devices.

Overall, the Standard Horizon line of chart plotters, including the CPV550, CP500, CP180I, CP180, and CP300, offers advanced technological features, reliable performance, and user-friendly interfaces, making them excellent choices for both leisure and professional mariners alike. With a focus on connectivity, visibility, and customizable options, these devices enhance the navigation experience on the water.
Top Page Image Contents