Standard Horizon CP180 owner manual CP300/CP300i Soft Keys, Getting Started

Page 26

To stop navigation to a point, press [GO TO] and select Stop on the pop-up window.

The MARK key

Places a Mark under the ships position when in Home Mode, or when the cursor is shown will place a Mark under the location of the cursor.

The ROUTE key

When pressed places a Waypoint. Succeeding presses place more Waypoints to form a Route.

The PWR key and Lamp/Contrast

Press and hold [PWR] to turn the GPS Chart Plotter on or off. Once on, press [PWR] to show the Contrast and Lamp popup window.

The MOB key

When pressed the GPS Chart Plotter automatically places a Mark on the Chart page under the boats position and all navigation is towards the position of the MOB Mark to aid in the rescue or a person that may have fallen overboard.

The INFO key

When pressed shows information on the selected point.

3.0.0The CP300/CP300i Soft Keys

The 6 keys in the bottom of the front panel (hereinafter named Soft Keys) have different functions associated depending on the software: their labels are shown on the screen immediately above the keys (the user can customize the function associated).

The Soft Keys

These keys allow quick selection to the many pages the GPS Chart Plotter has. These keys can be customized to your preference, however from the factory the keys are preprogrammed with the following pages. From left to right VIDEO, NAV, HIGHWAY, CELEST, CHART, LIST. Press any of the keys and you will see popup windows above the keys. To goto a specific page press the key with the desired popup window. The popup windows will automatically disappear if a key is not pressed or can be removed by pressing [CLR].

3.1GETTING STARTED

The Getting Started section will take you through the frequently used operations and assist you to customize the look of the GPS Chart Plotter.

3.1.0Power On, Off and ShuttlePoint knob operation

1.Press and hold [PWR] until the display shows the start-up page. To turn off, press and hold [PWR] until the display turns off.

2.When the power is first turned on two pages the start-up page (see the following picture) and the Caution page are briefly shown before the GPS Status page.

Page 28		GPS Chart Plotters

Image 26

Contents CP180/CP180i CP300/CP300i FCC Compliance Statement Cleaning Procedure for the GPS Chart Plotter Screen GPS Chart Plotters Table of Contents 10.0 Fonts & Symbols on the CP300/CP300iEditing a Mark 10.0.012.2 17.0.0 RAM Menu reset 17.0.1 DIM Menu 17.0.2Customizing the Data Windows 12.1 12.3GPS Chart Plotters Packing List IntroductionGeneral Information 0 CP180/CP180i Packing List Optional Accessories0 CP300/CP300i Optional Accessories 1 CP300/CP300i Packing ListBracket Mounting Mounting the GPS Chart PlotterGetting Started CP180 and CP300 Flush Mounting Mounting the CP180 or the CP300 External GPS Antenna0 Installing the GPS Waas Smart Antenna Flush mounting the antennaConnection Table For CP180/CP180i 12VDC Power and Nmea PWR & ACC 1 CableConnections PinSmart GPS Cable for CP180 and CP300 Wire Color DescriptionConnection Table For CP300/CP300i Connection For CP180/CP180i Video ConnectorDC Power Connection Nmea ACC 2 CableAIS Setup Connection of the FF520, AIS receiver, VHF and AutopilotConnection For CP300/CP300i Battery Connections Nmea ConnectionsOutputting Nmea to a Personal Computer GPS Position on a VHF RadioOptional Black BOX Fish Finder Other DSC VHF ManufacturesVideo Camera Input Nmea Data11 CP300/CP300i Video Input VCR or DVD InputIII. Quick Activation by Soft Keys From the menuII. Quick Activation by pressing CLR for 1 second Demo Mode for Dealer USE GPS Chart Plotters Controls and Indicators Controls and ConnectionsGetting Started Power On, Off and ShuttlePoint knob operationCP300/CP300i Soft Keys Home mode Cursor Vs. Home ModeCursor Mode Cursor may be changed to any of the following Cursor and Menu selection speedChanging the Ships Icon Changing the backlight and contrast Selecting North Up or Course UpAdjusting the Time Adjusting TimeChanging the Chart Color Selecting Loran TD or Other Coordinate SystemSelecting Pages Using Soft Keys on CP300/CP300i Customizing the Soft Keys on CP300/CP300iOther Settings in General Setup Menu Time SetupInformation Cursor SpeedOther Available Searches Using Find Services & More FunctionPort Services Full Info On Lakes Info on LakesQuick Info On Lakes Following is an example of Full Info on Lakes1a Example of picture associated to the Fishing object GPS Chart Plotters MAP MAX Overview New Data FeaturesNew Presentation Features Inserting the C-CARDMAX and NT/NT+ C-CARD coexistence MAX Functions Menu Fonts & Symbols on the CP300/CP300iMAP Functions Zoom TypePerspective View Dynamic Nav-AidsBoxes definition is as follows ZoomPictures & Diagrams Currents PredictionHow to show the pictures or diagrams of a Multimedia Object 6 Pictures and DiagramsEnhanced Port Info Editing a Mark Creating a NEW Mark Using the ChartCreating Marks Only for CP180/180iDeleting a Mark or Waypoint Moving a Mark or WaypointMARKS/WAYPOINTS List FindCreating a NEW Mark with the User Points List Goto CursorGoto Mark 4a Navigating to Cursor ExampleGPS Chart Plotters MAN Over Board MOB Function Deleting a MOB PointGPS Chart Plotters Creating a Route Using Waypoints RoutesMaking Additional Routes Creating a Route Using Marks on the ChartWhen finished press ENT to save Press CLR to show the Chart Goto a Route Other Settings in Route MenuInserting a Waypoint Into a Route By select RouteGPS Chart Plotters Tracks TrackingSaving and starting a new Track Other Settings in Track MenuUsing the Trip LOG ENTResetting the Trip Log GPS Chart Plotters Formatting the User C-CARD User C-CARDUser C-CARD Menu Transferring files to the optional User C-CARDRefreshing the User C-CARD Loading a fileDeleting a file from the User C-CARD Selection by Menu PagesPages can selected in the following way Selection by Soft KEY only for CP300/CP300iChart Window SelectionsTurning Off Information on Icon Points Additional Functions on ChartDisplay Mode Marine Settings To control the display on the map of the marine featuresChart Settings Depth SettingsLand Settings Underwater Objects SettingsNavigation Customizing Chart SettingsCustomizing the Data Windows Compass Rose HighwayFix position Time Speed Over Ground Course Over Ground Compass Tape Fix positionChanging date CelestialGPS Status Changing to and from Daylight Savings timeNmea Display Changing the Nmea page WindowsInterfacing Nmea DEPTH, Wind SPEED, Temp and SOG Trend PagesVHF Digital Selective Calling DSC Distress Call Position RequestGPS Chart Plotters Navigate Advanced SettingsINPUT/OUTPUT Nmea Alarms CompassGrounding Alarm GPS Chart Plotters AIS AIS System DefinitionsFunctions are described in the following table To SET the Chart Plotter for Receiving AISAIS Menu CPA and Tcpa values Quick Info on AIS TargetVessel Name Mmsi number Radio Call Sign SOG GPS Chart Plotters Download MAP Weather ServiceMAP Weather Service Menu Real Time View Copy From User C-CARDWeather Forecast Type of DataTrouble Shooting GPS Chart Plotters System Test RAM Menu resetTechnical Tests DIM MenuCartridges Serial PortsPower Consumption CP Specifications18.0 CP180/CP180i Specifications 520mA max @12VOperating temperature range 18.1 CP300/CP300i SpecificationsPower supply Storage temperatureGPS Waas Smart Receiver Specifications GPS Chart Plotters Appendix Terms Page Analitycal Index GPS Status Home Mode 27, 28Power and Nmea Cable Greenwich England Mean TimeUser Points 37, 93 GPS Chart Plotters Track Points 61, 93Route 28, 49, 93 Waypoint 28, 49Please Note

Related manuals

Manual 92 pages 12 b

Manual 42 pages 55.96 Kb