Standard Horizon CP180 owner manual Cartridges, Serial Ports

Page 90

17.0.2 Cartridges

To check the C-CARD and its connector.

Internal Data Base Test

To test the WorldWideBackground.

C-CARD Test

To test the C-CARD. There are the possible situations:

1. if there is a C-CARD inserted in the slot and there is not a malfunction, the name of the C-CARD zone and the message "OK" are shown.

2. if there is a C-CARD inserted in the slot, but it is a defective C-CARD, the name of the C-CARD zone and the message "Faulty" are shown.

3. if there is not any C-CARD inserted in the slot, the message "not present" is shown.

4. if there is a User C-CARD inserted in the slot, the message USER C-CARD is shown.

C-CARD Connector

Indicates if there is a malfunction in the connector.

17.0.3 Serial Ports

If you are having problems receiving data from the position-finding instrument, this test should help determine the problem.

Change Parameters

To change the parameters of the serial interface. This menu allows to select the Port (Signal Source) between PORT 1, PORT 2, PORT 3 (PORT4 and PORT 5 ONLY FOR CP300/ CP300I); the Baud Rate between 300, 1200, 2400, 4800, 9600, 38400, 115200; the Data Bits (Word Length) between 7 or 8, the Parity between even, odd or none, the Stop Bits between 1 or 2. Default settings are: Port = PORT 2, Baud Rate = 4800, Data Bits = 8, Parity = none, Stop Bits = 1.

Input Data Display

To allow the GPS Chart Plotter to act as a computer terminal and display the incoming data exactly as it is received.

If the data displayed on the screen is unrecognizable, you may have selected the wrong input parameters for your particular receiver, for example, Baud Rate 9600 instead of Baud Rate 4800. Check your receiver manual to be sure that you have selected the proper parameter. If the screen is blank, you may have a broken connection, and no data is being received or you may have connected the device to the other input port.

Use [ZOOM IN] to stop (or continue after pause) data displaying, [ENT] to show data in hex or ASCII mode (normal or small) and [CLR] to exit.

Loop-Back Test

This is a special test done during the production phase to check the serial ports integrity. A special connector is required.

Page 92

 

GPS Chart Plotters

 

 

Page 89 Page 91
Image 90
Page 89 Page 91
Contents CP180/CP180i CP300/CP300i FCC Compliance Statement Cleaning Procedure for the GPS Chart Plotter Screen GPS Chart Plotters Table of Contents 10.0 Fonts & Symbols on the CP300/CP300iEditing a Mark 10.0.012.2 17.0.0 RAM Menu reset 17.0.1 DIM Menu 17.0.2Customizing the Data Windows 12.1 12.3GPS Chart Plotters Introduction General InformationPacking List 0 CP180/CP180i Packing List Optional Accessories0 CP300/CP300i Optional Accessories 1 CP300/CP300i Packing ListMounting the GPS Chart Plotter Getting StartedBracket Mounting CP180 and CP300 Flush Mounting Mounting the CP180 or the CP300 External GPS Antenna0 Installing the GPS Waas Smart Antenna Flush mounting the antennaConnection Table For CP180/CP180i 12VDC Power and Nmea PWR & ACC 1 CableConnections PinWire Color Description Connection Table For CP300/CP300iSmart GPS Cable for CP180 and CP300 Connection For CP180/CP180i Video ConnectorDC Power Connection Nmea ACC 2 CableAIS Setup Connection of the FF520, AIS receiver, VHF and AutopilotConnection For CP300/CP300i Battery Connections Nmea ConnectionsOutputting Nmea to a Personal Computer GPS Position on a VHF RadioOptional Black BOX Fish Finder Other DSC VHF ManufacturesVideo Camera Input Nmea Data11 CP300/CP300i Video Input VCR or DVD InputFrom the menu II. Quick Activation by pressing CLR for 1 secondIII. Quick Activation by Soft Keys Demo Mode for Dealer USE GPS Chart Plotters Controls and Indicators Controls and ConnectionsPower On, Off and ShuttlePoint knob operation CP300/CP300i Soft KeysGetting Started Cursor Vs. Home Mode Cursor ModeHome mode Cursor and Menu selection speed Changing the Ships IconCursor may be changed to any of the following Changing the backlight and contrast Selecting North Up or Course UpAdjusting the Time Adjusting TimeChanging the Chart Color Selecting Loran TD or Other Coordinate SystemSelecting Pages Using Soft Keys on CP300/CP300i Customizing the Soft Keys on CP300/CP300iOther Settings in General Setup Menu Time SetupInformation Cursor SpeedUsing Find Services & More Function Port ServicesOther Available Searches Full Info On Lakes Info on LakesQuick Info On Lakes Following is an example of Full Info on Lakes1a Example of picture associated to the Fishing object GPS Chart Plotters MAP MAX Overview New Data FeaturesNew Presentation Features Inserting the C-CARDMAX and NT/NT+ C-CARD coexistence MAX Functions Menu Fonts & Symbols on the CP300/CP300iMAP Functions Zoom TypePerspective View Dynamic Nav-AidsBoxes definition is as follows ZoomPictures & Diagrams Currents PredictionHow to show the pictures or diagrams of a Multimedia Object 6 Pictures and DiagramsEnhanced Port Info Editing a Mark Creating a NEW Mark Using the ChartCreating Marks Only for CP180/180iDeleting a Mark or Waypoint Moving a Mark or WaypointMARKS/WAYPOINTS List FindCreating a NEW Mark with the User Points List Goto CursorGoto Mark 4a Navigating to Cursor ExampleGPS Chart Plotters MAN Over Board MOB Function Deleting a MOB PointGPS Chart Plotters Creating a Route Using Waypoints RoutesCreating a Route Using Marks on the Chart When finished press ENT to save Press CLR to show the ChartMaking Additional Routes Goto a Route Other Settings in Route MenuInserting a Waypoint Into a Route By select RouteGPS Chart Plotters Tracks TrackingSaving and starting a new Track Other Settings in Track MenuUsing the Trip LOG ENTResetting the Trip Log GPS Chart Plotters Formatting the User C-CARD User C-CARDUser C-CARD Menu Transferring files to the optional User C-CARDLoading a file Deleting a file from the User C-CARDRefreshing the User C-CARD Selection by Menu PagesPages can selected in the following way Selection by Soft KEY only for CP300/CP300iChart Window SelectionsAdditional Functions on Chart Display ModeTurning Off Information on Icon Points Marine Settings To control the display on the map of the marine featuresChart Settings Depth SettingsLand Settings Underwater Objects SettingsCustomizing Chart Settings Customizing the Data WindowsNavigation Compass Rose HighwayFix position Time Speed Over Ground Course Over Ground Compass Tape Fix positionChanging date CelestialGPS Status Changing to and from Daylight Savings timeNmea Display Changing the Nmea page WindowsNmea DEPTH, Wind SPEED, Temp and SOG Trend Pages VHF Digital Selective CallingInterfacing DSC Distress Call Position RequestGPS Chart Plotters Advanced Settings INPUT/OUTPUT NmeaNavigate Alarms CompassGrounding Alarm GPS Chart Plotters AIS AIS System DefinitionsTo SET the Chart Plotter for Receiving AIS AIS MenuFunctions are described in the following table Quick Info on AIS Target Vessel Name Mmsi number Radio Call Sign SOGCPA and Tcpa values GPS Chart Plotters MAP Weather Service MAP Weather Service MenuDownload Real Time View Copy From User C-CARDWeather Forecast Type of DataTrouble Shooting GPS Chart Plotters System Test RAM Menu resetTechnical Tests DIM MenuCartridges Serial PortsPower Consumption CP Specifications18.0 CP180/CP180i Specifications 520mA max @12VOperating temperature range 18.1 CP300/CP300i SpecificationsPower supply Storage temperatureGPS Waas Smart Receiver Specifications GPS Chart Plotters Appendix Terms Page Analitycal Index GPS Status Home Mode 27, 28Power and Nmea Cable Greenwich England Mean TimeUser Points 37, 93 GPS Chart Plotters Track Points 61, 93Route 28, 49, 93 Waypoint 28, 49Please Note
Related manuals
Manual 92 pages 12 b Manual 42 pages 55.96 Kb

CP180 specifications

Standard Horizon is well known for its innovative marine electronics, particularly its line of chart plotters and multifunction displays. Among its popular products are the CPV550, CP500, CP180I, CP180, and CP300 models, each designed to enhance navigational experience for boaters and sailors.

The Standard Horizon CPV550 is a cutting-edge chart plotter that features a bright, high-resolution 5.5-inch color display. This model supports Navionics and C-MAP charts, ensuring users have access to high-quality cartography. Its built-in GPS receiver offers exceptional accuracy and fast position fixes, while its user-friendly interface allows for easy navigation through menus and functions. The CPV550 is equipped with a variety of connectivity options, including NMEA 0183, allowing for seamless integration with other onboard electronics.

The CP500 is another robust option, featuring a 5-inch display and advanced GPS technology. This model is designed for ease of use, with a straightforward interface that appeals to both novice and experienced users. It offers real-time tracking and position monitoring, making it ideal for coastal cruising and fishing. The CP500 supports various cartography formats, providing flexibility for users who prefer different map sources.

Moving on, the CP180I model stands out with its innovative integrated design, packing a 7-inch display and multiple advanced features into a compact unit. It includes built-in Wi-Fi, allowing users to connect their mobile devices and access updates or weather information directly from the display. The CP180I is also compatible with a wide range of NMEA 2000 devices, offering greater customization options for boaters looking to expand their electronic setups.

The CP180 offers similar capabilities but focuses on a slightly larger 8-inch screen. This model enhances visibility and provides an intuitive experience with its touch-screen interface. It supports various navigation modes and features such as AIS overlay and radar integration, which significantly improve situational awareness on the water.

Finally, the Standard Horizon CP300 is a versatile chart plotter that combines advanced features with exceptional user-friendliness. This model features a 9-inch display that offers crisp visuals and enhanced readability even in bright sunlight. It also stands out for its robust integration capabilities with other marine instruments. The CP300 includes built-in Bluetooth and Wi-Fi, allowing for wireless data sharing and connectivity with smart devices.

Overall, the Standard Horizon line of chart plotters, including the CPV550, CP500, CP180I, CP180, and CP300, offers advanced technological features, reliable performance, and user-friendly interfaces, making them excellent choices for both leisure and professional mariners alike. With a focus on connectivity, visibility, and customizable options, these devices enhance the navigation experience on the water.
Top Page Image Contents